Visqueen Waterproofing

A flexible black plastic strip, 2m long, 25mm high and 2mm thick. The strip is pre-drilled at 150mm centres with 8mm diameter holes (13 holes per strip). The strip are supplied individually.

A a black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers.

Unit Sizes: 100mm x 20m

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Size: 100mm x 20m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 112.5mm x 20m roll

A black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 150mm x 20m roll

A small PVC moulded connector piece to link two lengths of CD Channel.

Visqueen UDG Corner Units (unit dimension 150mm x 150mm x 150mm) should be positioned at the external corners of the crate system

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 150mm x 20m rolls

A swellable high performance, one component, of-white polyurethane adhesive supplied in 310ml cartridges. Unit Size: 310ml

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 225mm x 20m roll

A double-sided butyl rubber tape. Unit Size: 10mm x 5m - 2 per box

A white, flame retardant, flexible sealant supplied in 380ml cartridges. Unit Size: 380ml

Visqueen Masonry Plugs are made from Polyoxymethylene (10mm diameter and 75mm in length) Unit Size: 100 per box

A PVC moulded unit used to provide cleaning, inspection, and maintenance access to the water channel system.

A PVC moulded drainage conduit, which should be fitted around the periphery of an internal floor at the vulnerable wall/floor junction. . Any water entering the building through walls or curved softs is controlled behind the membrane and enters the channel through the pre-drilled 19mm holes before being diverted to the mechanical (sump and pump) or natural drainage point. Unit Size: 2m lengths, 80mm wide, 50mm deep

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 300mm x 20m roll

A double sided butyl based compound with an oversize quick release flm. Unit Size: 100mm x 15m

Visqueen Ultimate Double Sided Jointing Tape is a double sided butyl based compound with an oversize quick release fm. Unit Size: 100mm x 15m roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 337.5mm x 20m roll

A black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 450mm x 20m roll

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. All rolls are supplied multi folded. Unit Size: 4m x 25m

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 450mm x 20m roll

A single sided high strength aluminium tape coated with a high bond acrylic adhesive and a removable release flm protecting the adhesive coating. Unit Size: 75mm x 15m

A double-sided butyl rubber tape Unit Size: 25mm x 20m

A black, flexible 0.6mm damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 600mm x 20m roll

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. Unit Sizes: 0.3mm x 4m x 25m roll, 0.5mm x 4m x 12.5m

A black elastomeric bituminous priming solution. Unit Size: 5ltr tin

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 600mm x 20 roll

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 750mm x 20m roll

A single sided butyl rubber self adhesive tape. Unit Size: 150mm x 10m

A swellable hydrophilic polymer waterstop. Manufactured from thermoplastic synthetic rubber, the product is lightweight and highly flexible. The strap is coloured orange for ease of recognition. Visqueen IGW Pipe Strap is supplied in packs of 5 straps.

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 900mm x 20m roll

Visqueen Urban Drainage Geomembrane is a 100% recycled polyethylene geomembrane, black in colour, 0.5mm thick and supplied in multi folded rolls. Unit Size: 4m x 12.5m

A grey cementitious compound containing portland cement, graded quartz sands, aggregates and chemical additives. Unit Size: 25kg tin

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 450mm wide

A black, flexible 0.8mm co-polymer thermoplastic (CPT) damp proof course and cavity tray system. It is manufactured from a mixture of thermoplastic polymers and additives including elastomers. Unit Sizes: 1000mm x 20m roll

A fexible stainless steel strip, 1240mm long, 25mm high, with 8mm pre-drilled holes spaced at 150mm centres. There are 9 holes per strip and the strips are supplied in packs of 17 items. Unit Size: 21m pk

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 600mm wide

A robust co-polymer thermoplastic membrane, 0.5mm thick, yellow in colour. Unit Size: 4m x 12.5m center folded roll

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 20m x 500mm rolls

A clear, single component polyurethane based primer. Unit Size: 4kg tin

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 100mm x 20m roll

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Unit Size: 25kg drums

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 20m x 600mm rolls

A high performance sodium bentonite and butyl rubber. Unit Size: The waterstop bar is 20mm x 25mm x 5m long

A heavy duty, traditional DPC and cavity tray system manufactured with a polyester reinforced carrier, rubber modifed bituminous coating and surfaced on both sides with a fne silica sand. Unit Size: Supplied in 8m length rolls 1000mm wide

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 750mm X 20m roll

A modifed bitumen rubber tanking membrane. It has a sanded fnish to the top surface and a heat dispersible flm on the underside. Unit Size: 1m x 8m roll

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. Unit Size: 600mm x 20m

A modifed bitumen rubber membrane with a self adhesive coating protected by a removable polyethylene release flm. It is dark grey on the upper surface. Unit Size: 1m x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 150mm x 20m roll

Swellable hydrophilic polymer waterstops. Manufactured from thermoplastic synthetic rubber, the products are lightweight and highly flexible. Unit Sizes: IGW5 Waterstop = 10m long strips, 20mm wide and 5mm high.

A 0.5mm thick high density polyethylene (HDPE) profiled sheet with approximate 7 mm high studs. Unit Size: roll of 2.07m x 20m with a 70mm flange edge on one side to aid jointing

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. The DPC has an embossed/debossed fnish, is coloured gold/white and can be installed with either surface facing upwards. Unit Size: 900mm X 20m roll

Visqueen Gas Resistant Self Adhesive Membrane is a foil lined modifed bitumen rubber membrane with a self adhesive coating protected by a removable polyethylene release flm. Unit Size: 1m x 20m

Visqueen Ultimate Gas DPC utilises Visqueen's Advanced Barrier Technology. The DPC is a 0.5mm thick, flexible 7 layer co-extruded film providing volatile organic compound (VOC) and ground gas resistance. Unit Size: 850mm x 20m

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 225mm x 20m roll

Visqueen High Performance Urban Drainage Geomembrane is a robust thermoplastic geomembrane, black in colour, 1mm thick and supplied in single wound rolls (not folded). Unit Size: 1.4m x 50m

A 1.0mm thick high density polyethylene (HDPE) profiled sheet with approximate 20 mm high studs . Unit Size: 2m x 20m roll

A crystalline waterproofing admixture powder consisting of a blend of specially selected chemicals. When combined with ready mix concrete at batching plant, it produces a crystalline reaction which enhances water resistance and durability of the cured concrete. Unit Size: A tub consisting of six 4.1 kg soluble bags and used in the ratio of 1:1 i.e. one 4.1kg bag for each 1m³ of concrete.

A two component system both supplied in the same tin. The first component (Part A) is a bitumen-extended polyurethane fluid (15kg). The second component (Part B) is an accelerator hardener (0.6kg). Unit Size: 15.6kg

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 300mm x 20m roll

A grey, single component liquid damp proof and waterproof membrane. Unit Size: 20kg tins

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 450mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 500mm x 20m roll

Swellable hydrophilic polymer waterstops. Manufactured from thermoplastic synthetic rubber, the products are lightweight and highly flexible. Unit Size: 10m long strips, 20mm wide and 10mm high.

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 600mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 700mm x 20m roll

A flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 800mm x 20m roll

Aa flexible 0.6mm composite damp proof course and cavity tray system. It is supplied in 20m rolls and available in a wide-variety of widths. Unit Size: 900mm x 20m roll

A 1mm thick, robust co-extruded waterproofng membrane. It is coloured grey on the upper surface and black on the reverse. The grey surface is textured to aid adhesion to cast concrete. Unit Size: 2.44m x 41m