Visqueen Gas Protection

Black fixings designed for securing into the rigid urethane foam insulation of a SFS substrate. The fixings are 8mm diameter, 35mm long and supplied 500 per bag.

A robust co-polymer thermoplastic gas membrane, 0.5mm thick, yellow in colour. Unit Size: 4m x 12.5m roll

.

A 0.4mm thick co-polymer thermoplastic membrane. Unit Size: 4m x 20m roll

A composite of PET/aluminium and a high performance cold weather butyl compound. Unit Sizes: 300mm x 10m roll, 500mm x 10m roll

A single sided high strength aluminium flashing tape coated with a high bond acrylic adhesive and a removable release film protecting the adhesive coating. Unit Size: 150mm x 15m roll

A green tinted, semi-transparent polyethylene air and vapour control layer (AVCL). The membrane is supplied in multi folded rolls. Unit Size: 4m x 50m roll

A pre-fabricated sump unit manufactured from moulded black ABS plastic. The unit has four equidistant perimeter outlet ports, along with a central outlet port for vertical pipework installation. Unit Size: The sump unit dimensions are 700mm x 700mm x 250mm high

Visqueen Ultimate Top Hat Units are made from Visqueen Ultimate HC BLOK and are supplied with a metal jubilee clip. Unit Sizes: 110mm, 160mm. These sizes relate to the external diameter of the pipe.

Visqueen Ultimate Top Hat Units are made from Visqueen Ultimate HC BLOK and are supplied with a metal jubilee clip. Unit Sizes: 110mm, 160mm. These sizes relate to the external diameter of the pipe.

An aluminium/HDPE composite layer on the upper surface and a high performance adhesive layer on the underside. The adhesive layer is protected with a removable release flm. Unit Size: 150mm x 10m

Visqueen EcoMembrane DPM is manufactured from a minimum 90% recycled polyethylene. Unit Sizes: 0.3mm x 4m x 25m roll, 0.5mm x 4m x 12.5m

A one component styrene-butadiene rubber primer suitable for all substrates. Unit Size: 5 litre tin

A high bond acrylic double sided tape with a removable release flm protecting the adhesive coating. Unit Size: 20mm x 50m

Visqueen Top Hat Units are made from co-polymer plastic. The units are supplied with metal jubilee clips. Unit Sizes: 315mm

A white flame retardant acrylic double sided tape with a removable release film protecting the adhesive coating. Unit Size: 20mm x 50m roll

Visqueen Ultimate Double Sided Jointing Tape is a double sided butyl based compound with an oversize quick release flm. Unit Size: 100mm x 15m roll

Visqueen Top Hat Units are made from co-polymer plastic. The units are supplied with metal jubilee clips. Unit Sizes: 200mm

An overlap tape which has a solvent acrylic adhesive with a composite aluminium/PET carrier therefore it is resistant to alkaline which is present in cement and concrete. The tape also has a release flm. Unit Size: 75mm x 50m roll