Sika Waterproofing

Sika Tricosal BV DA240 is highly flexible waterstops made from PVC/NBR copolymer for sealing expansion and construction joints in watertight concrete structures. Unit Size: Roll

A highly flexible waterstop made from PVC/NBR copolymer for sealing expansion and construction joints in watertight concrete structures. Unit Size: Roll

A mechanical plug specifically designed to seal the void formed in a concrete wall by the removal of a taper tie rod or pass through tie sleeve.

Sika® Brick plugs are 10mm fixings to use with membrane systems, with the advantage of a rubber seal already attached. Unit Size: 200 per box

Sikadrainage Membrane consists of molded high-density polyethylene and polypropylene membranes and fixing/sealing materials. Unit Size: Roll

A 2-part epoxy based thixotropic adhesive for bonding the Sikadur-Combiflex® SG modified flexible Polyolefin (FPO) waterproofing tapes to different substrates. Unit Size: 6kg (A+B)

A one-component, crack-bridging, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. Unit Size: 20kg bag

A two component, solvent free, highly elastic, low odour polyurea hybrid waterproofing membrane. Unit Size: 25kg (Part A= 9.2kg, Part B=15.8kg)

A two part, elastic, 100% solids, very fast curing and coloured Polyurethane/ Polyurea-Hybrid liquid applied membrane with moderate chemical resistance. Unit Size: Part A=211kg, Part B=202kg

A two part, elastic, 100 % solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance. Unit Size: Part A=212kg, Part B=191kg

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 4.5ltr (Part A=3.48ltr, Part B=1.02ltr)

A two-component, anticorrosive primer for exposed metal substrates and blocking primer over bituminous felts and coatings. Unit Size: 5ltr (Part A=2.5ltr, Part B=2.5ltr)

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 11.5ltr (Part A=8.89ltr, Part B=2.61ltr)

A galvanised metal sheet with a special coating applied on one side to increase its adhesion to fresh concrete Unit Size: 15m rolls

A polyolefin (FPO) based sheet membrane for below waterproofing of reinforced concrete structures. Unit Size: 1m x 25m roll

A polyolefin (FPO) based sheet membrane for below waterproofing of reinforced concrete structures. Unit Size: 2m x 25m roll

A polyolefin (FPO) based sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Size: 1m x 20m

A polyolefin (FPO) based sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Size: 2m x 20m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 1m x 20m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 2m x 20m This product is not purchasable on the website. Please call or email to place your order.

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 20m

A fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap. Unit Sizes: 1m x 30m

A fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap. Unit Sizes: 2m x 30m This product is not purchasable on the website. Please call or email to place your order.

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 1m x 25m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 2m x 25m This product is not purchasable on the website. Please call or email to place your order.