Sika Waterproofing

.

The Sika Cavity Drainage System Corner Piece is installed at the corners of a perimeter drainage channel system to allow continuity of the drainage system.

A 150mm wide tape which has many uses but is mostly used to seal membrane from walls to floors and the channel system. Tacky on one side only, this can also be used to overtape external joints and used on floor oversealing. Unit Size: 150mm x 20m

A PVC drainage conduit for the control of water ingress in below ground waterproofing situations. It has a flange upstand and is fitted around the perimeter of the floor at the vulnerable wall to floor junction, directly any ingress of water towards a sump chamber or drain. Unit Size: each

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Unit Size: 25kg

A rapid setting waterproofing admixture, which when mixed with ordinary Portland cement and water, sets rapidly to seal areas of severe water infiltration through concrete, rock or masonry. Unit Size: 5ltr

Sika 4 Rapid Setting is used to aid the quick setting of cement based renders and concretes where low water pressure or slow moving water exists. Unit Size: 5 ltr

An extra-quick setting liquid waterproofing admixture that causes almost immediate setting and very rapid hardening of Ordinary Portland Cement. Unit Size: 5ltr

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 5ltr and 25 ltr

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 25 ltr

A post applied self-adhesive waterproofing sheet membrane. It is based on a top layer of polyethylene film bonded to a layer of bitumen/polymer adhesive carried on a release paper, with a selvedge strip. Unit Size: 1.05m x 19.05m

A bitumen solution to be used in conjunction with Sika BituSeal S-115. Unit Sizes: 25ltr, 5ltr

A bitumen solution to be used in conjunction with Sika BituSeal S-115. Unit Sizes: 25ltr, 5ltr

Sika Bentoshield fixing washers are special plastic washers used to fix Sika Bentoshield membrane to vertical surfaces and horizontal laps. Unit Size:

A galvanised steel bonding strip with 5mm holes at 15mm centres in a solid plastic holder. Unit Size: 12mm wide x 10m long x 1mm thick

A self healing waterproofing membrane that is resistant to contaminated soils, forming an automatic mechanical bond to freshly poured concrete. Unit Size: 1.1m x 5m rolls

A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives. Trowel applied and thixotropic in nature. Unit Size: 15ltr

Sika Bentoshield Granules are polymer modified natural sodium bentonite granules, when wetted these granules form a dense waterproof paste. Unit Size: 25kg

The Sika Bentoshield Fixing Nose Piece is designed to support the washer on the end of the gun and hold it in place for safe and correct fixing of the Sika Bentoshield membrane system. Unit Size: