Sika Waterproofing

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=26mm, External diameter=28mm

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=18mm, External diameter=20mm

Sika®-1 Pre-bag Render Mortar is part of the Sika® 1 Pre-Bagged Structural Waterproofing System. Unit Size: 25kg

Sika®-1 Pre-bag Spritz Mortar is part of the Sika® 1 Pre Bagged Structural Waterproofing System. Unit Size: 25kg

A two-component, anticorrosive primer for exposed metal substrates and blocking primer over bituminous felts and coatings. Unit Size: 5ltr (Part A=2.5ltr, Part B=2.5ltr)

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 4.5ltr (Part A=3.48ltr, Part B=1.02ltr)

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 11.5ltr (Part A=8.89ltr, Part B=2.61ltr)

A two part, elastic, 100 % solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance. Unit Size: Part A=212kg, Part B=191kg

A two part, elastic, 100% solids, very fast curing and coloured Polyurethane/ Polyurea-Hybrid liquid applied membrane with moderate chemical resistance. Unit Size: Part A=211kg, Part B=202kg

A two component, solvent free, highly elastic, low odour polyurea hybrid waterproofing membrane. Unit Size: 25kg (Part A= 9.2kg, Part B=15.8kg)

A one-component, crack-bridging, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. Unit Size: 20kg bag

A 1-part, polymer modified, ready to use bitumen emulsion primer. Unit Size: 10 ltr

A 2 component polymer modified bituminous flexible thick coating extended with fibre for waterproofing against dampness and moisture ingress. Unit Size: 32kg (Part A-Liquid=24kg, Part B-Powder=8kg)

.

A self‐adhesive tape, based on a polyacrylate adhesive on a yellow carrier film coated with the SikaProof A fully bonded system. Unit Sizes: 150mm x 25m roll

A single-sided, self-adhesive tape based on SikaProof® membrane, laminated with a butyl adhesive covered with a release liner. Unit Size: 200mm x 20m

A flexible polyolefin (FPO) self-adhesive sheet membrane. Designed to be used for post-applied fully bonded below ground waterproofing of existing reinforced concrete structures. Unit Size: 1m x 20m

A synthetic rubber based, solvent-dispersed, primer for use as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 12.5kg

A synthetic rubber based, solvent-dispersed primer. Designed to be used as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 5kg

A self-adhesive tape based on a butyl adhesive for external jointing and detailing on SikaProof® A & P membrane systems. The tape is composed of a yellow carrier film and a divided release liner. Unit Size: Length 20m x Width 150mm

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 25m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 2m x 25m This product is not purchasable on the website. Please call or email to place your order.

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 1m x 25m

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 20m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 1m x 20m