Sika Waterproofing

A two part, elastic, 100 % solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance. Unit Size: Part A=212kg, Part B=191kg

A two part, elastic, 100% solids, very fast curing and coloured Polyurethane/ Polyurea-Hybrid liquid applied membrane with moderate chemical resistance. Unit Size: Part A=211kg, Part B=202kg

A re-injectable hose for sealing various construction and connection joints in watertight concrete structures. Unit Size: Supplied as a Combi-pack in a cardboard box containing: ▹ 200m SikaFuko VT 1 ▹ 10m green PVC-hose (inlet) ▹ 10m white PVC-hose (outlet) ▹ Accessories: (2m connecting pipe, 4m heat shrink sleeve, x 50 closure plugs, 1 can of glue, 1 roll of tape, x 800 fasttening clips)

A highly flexible waterstop made from PVC/NBR copolymer for sealing expansion and construction joints in watertight concrete structures. Unit Size: Roll

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joints. Unit Size: 25m long x 2mm thick x 200mm width

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 2m x 20m This product is not purchasable on the website. Please call or email to place your order.

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 2m x 25m This product is not purchasable on the website. Please call or email to place your order.

A polyolefin (FPO) based sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Size: 2m x 20m

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length, thickness 1mm Varying widths available: 10, 20, 30cm

A polyolefin (FPO) based sheet membrane for below waterproofing of reinforced concrete structures. Unit Size: 2m x 25m roll

Sika Tricosal BV DA240 is highly flexible waterstops made from PVC/NBR copolymer for sealing expansion and construction joints in watertight concrete structures. Unit Size: Roll

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 20m

A flexible polyolefin (FPO) self-adhesive sheet membrane. Designed to be used for post-applied fully bonded below ground waterproofing of existing reinforced concrete structures. Unit Size: 1m x 20m

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 25m

A flexible waterproofing tape on polyvinyl chloride (PVC) with advanced adhesion properties. The tape seals construction and connection joints on concrete or metal substrates. Unit Sizes: 1.6mm thickness x 30m length x 220mm width

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length Varying widths available: 10, 20, 30cm

A polyolefin (FPO) based sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Size: 1m x 20m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 1m x 20m

A fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap. Unit Sizes: 2m x 30m This product is not purchasable on the website. Please call or email to place your order.

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 1m x 25m

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=26mm, External diameter=28mm

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=43mm, External diameter=45mm

A polyolefin (FPO) based sheet membrane for below waterproofing of reinforced concrete structures. Unit Size: 1m x 25m roll

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=18mm, External diameter=20mm

A high density polyethylene (HDPE), heavy duty drainage and protection sheet with 10mm high dimples on the bottom layer and a bonded geotextile (PP) filtration layer on the top layer. Unit Size: 2,44m width x 12,50m length

A galvanised metal sheet with a special coating applied on one side to increase its adhesion to fresh concrete Unit Size: 15m rolls

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length Varying widths available: 10, 20, 30cm

A two component, solvent free, highly elastic, low odour polyurea hybrid waterproofing membrane. Unit Size: 25kg (Part A= 9.2kg, Part B=15.8kg)

A 2 component polymer modified bituminous flexible thick coating extended with fibre for waterproofing against dampness and moisture ingress. Unit Size: 32kg (Part A-Liquid=24kg, Part B-Powder=8kg)

The Sika Bentoshield Fixing Nose Piece is designed to support the washer on the end of the gun and hold it in place for safe and correct fixing of the Sika Bentoshield membrane system. Unit Size:

A high-density polyethylene, high capacity cavity drainage membrane. Unit Size: 2m x 20m long

A single-sided, self-adhesive tape based on SikaProof® membrane, laminated with a butyl adhesive covered with a release liner. Unit Size: 200mm x 20m

A self‐adhesive tape, based on a polyacrylate adhesive on a yellow carrier film coated with the SikaProof A fully bonded system. Unit Sizes: 150mm x 25m roll

A fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap. Unit Sizes: 1m x 30m

A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 5mm x 20m

Sika® Brick plugs are 10mm fixings to use with membrane systems, with the advantage of a rubber seal already attached. Unit Size: 200 per box

Sika Bentoshield fixing washers are special plastic washers used to fix Sika Bentoshield membrane to vertical surfaces and horizontal laps. Unit Size:

A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives. Trowel applied and thixotropic in nature. Unit Size: 15ltr

A glass fibre mat reinforcement for Decothane and Sikalastic Liquid Applied Membrane Systems. Unit Size: Roll

.

.

A 150mm wide tape which has many uses but is mostly used to seal membrane from walls to floors and the channel system. Tacky on one side only, this can also be used to overtape external joints and used on floor oversealing. Unit Size: 150mm x 20m

Extra hard nails for use with the Trak-It C5 gas fixing tool. Unit Size: Sold per box, 700 in a box

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 11.5ltr (Part A=8.89ltr, Part B=2.61ltr)

A post applied self-adhesive waterproofing sheet membrane. It is based on a top layer of polyethylene film bonded to a layer of bitumen/polymer adhesive carried on a release paper, with a selvedge strip. Unit Size: 1.05m x 19.05m

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Unit Size: 25kg

Sikadrainage Membrane consists of molded high-density polyethylene and polypropylene membranes and fixing/sealing materials. Unit Size: Roll

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 25 ltr

A self-adhesive tape, with a carrier film and release liner, for internal jointing of Sikaproof A+ waterproofing system. Unit Size: 25m roll

A 2 part, polyurea/polyurethane-hybrid primer for cementitious substrates. The rapid curing performance allows overcoating of Sika Liquid Applied Membrane (LAM) roofing systems after 30 minutes. Unit Size: 11.5ltr (Part A=9ltr, Part B=2.5ltr)

A synthetic rubber based, solvent-dispersed, primer for use as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 12.5kg

A bitumen solution to be used in conjunction with Sika BituSeal S-115. Unit Sizes: 25ltr, 5ltr

A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 10mm x 10m

A double-sided adhesive overlap tape based on a polyacrylic adhesive sandwiched between release liners. Unit Size: Each

A two-component, anticorrosive primer for exposed metal substrates and blocking primer over bituminous felts and coatings. Unit Size: 5ltr (Part A=2.5ltr, Part B=2.5ltr)

A self-adhesive tape based on a butyl adhesive for external jointing and detailing on SikaProof® A & P membrane systems. The tape is composed of a yellow carrier film and a divided release liner. Unit Size: Length 20m x Width 150mm

A 2-part epoxy based thixotropic adhesive for bonding the Sikadur-Combiflex® SG modified flexible Polyolefin (FPO) waterproofing tapes to different substrates. Unit Size: 6kg (A+B)

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 4.5ltr (Part A=3.48ltr, Part B=1.02ltr)

A self healing waterproofing membrane that is resistant to contaminated soils, forming an automatic mechanical bond to freshly poured concrete. Unit Size: 1.1m x 5m rolls

A two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. Unit Sizes: 25kg (20kg bag & 5kg pail)

A synthetic rubber based, solvent-dispersed primer. Designed to be used as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 5kg

A one-component, crack-bridging, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. Unit Size: 20kg bag

Sika Bentoshield Granules are polymer modified natural sodium bentonite granules, when wetted these granules form a dense waterproof paste. Unit Size: 25kg

A one part flowable shrinkage compensated general purpose cementitious mortar for waterproofing applications. Unit Size: 25kg

A double-sided, self-adhesive tape based on a butyl rubber adhesive covered with a release liner Unit Size: 50mm x 20m

The Sika Fuko Injection Junction Box can be installed in concrete construction joints to waterproof them and also to seal any cracks or voids in the joint areas. Unit Size: Box of 5

Sika 4 Rapid Setting is used to aid the quick setting of cement based renders and concretes where low water pressure or slow moving water exists. Unit Size: 5 ltr

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 5ltr and 25 ltr

Sika Plaster Plugs can be used with Sika mesh membrane systems and have a serrated head which can take plaster or dot and dab.

.

The Sika flexible jetting eye has been designed to allow cleaning of the channel system and also an inspection port. The unique flexible upstand jetting point can be easily bent to allow the channel to be used in a wall port system. It also has the benefit of allowing slabs to be laid whilst still being easily accessible afterwards.

The Sika Cavity Drainage System Corner Piece is installed at the corners of a perimeter drainage channel system to allow continuity of the drainage system.

The Sika Cavity Drainage System Channel T Piece is installed at the junction between wall and cross channel drainage system to allow continuity of the drainage system.

A 1-part, polymer modified, ready to use bitumen emulsion primer. Unit Size: 10 ltr

An extra-quick setting liquid waterproofing admixture that causes almost immediate setting and very rapid hardening of Ordinary Portland Cement. Unit Size: 5ltr

A bitumen solution to be used in conjunction with Sika BituSeal S-115. Unit Sizes: 25ltr, 5ltr

A rapid setting waterproofing admixture, which when mixed with ordinary Portland cement and water, sets rapidly to seal areas of severe water infiltration through concrete, rock or masonry. Unit Size: 5ltr

Sika®-1 Pre-bag Spritz Mortar is part of the Sika® 1 Pre Bagged Structural Waterproofing System. Unit Size: 25kg

A drainage outlet that can be used to get water from the channels to the sump chamber or existing drain. The angle bend on the underside of the channel takes water through a 32mm connection.

Sika 1 Finishing Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum application performance and durability. Unit Size: 25kg

Sika®-1 Pre-bag Render Mortar is part of the Sika® 1 Pre-Bagged Structural Waterproofing System. Unit Size: 25kg

Sika Screeding Mortar when mixed with water provides the multicoat components for the structural waterproofing systems Unit Size: 25kg bag

Trak-It C5 Fuel cells are spare fuel cells to power the Trak-It C5 gas fixing tool. Each fuel cell contains enough gas to install over 800 fasteners. Unit Size: each

A fast curing, non-swelling, 1-part adhesive with very high initial grab which bonds most common construction substrates. Can be used for adhering SikasSwell® Profiles within construction joints. Unit Size: 600ml sausage

A PVC drainage conduit for the control of water ingress in below ground waterproofing situations. It has a flange upstand and is fitted around the perimeter of the floor at the vulnerable wall to floor junction, directly any ingress of water towards a sump chamber or drain. Unit Size: each

A 1-part polyurethane hydrophilic sealant which swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 600ml

A 10mm bead of butyl rope, which is used to either wrap around the head of plugs in membrane installation, or to form a jointing waterproof seal on walls and floor membrane systems. Unit Size: 10mm wide x 5m long

A single-sided adhesive tape. It consists of a butyl rubber adhesive that is covered with a release liner. Unit Size: 10m roll

A one part polymer modified cement based waterproof coating comprising of special cement based components and admixtures. When mixed with water a slurry or mortar material is produced for direct application to a variety of construction substrates. Unit Size: 25kg bag

Febtank Plug, when mixed with clean water, provides a ready to use rapid-setting durable plugging compound for active leaks in masonry and concrete. Unit Size: 5kg

A galvanised steel bonding strip with 5mm holes at 15mm centres in a solid plastic holder. Unit Size: 12mm wide x 10m long x 1mm thick

A mechanical plug specifically designed to seal the void formed in a concrete wall by the removal of a taper tie rod or pass through tie sleeve.