Sika

Extra hard nails for use with the Trak-It C5 gas fixing tool. Unit Size: Sold per box, 700 in a box

A gas fastening system designed for use in light-duty static applications. Unit Size: Each

Trak-It C5 Fuel cells are spare fuel cells to power the Trak-It C5 gas fixing tool. Each fuel cell contains enough gas to install over 800 fasteners. Unit Size: each

A two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. Unit Sizes: 25kg (20kg bag & 5kg pail)

A 1-part polyurethane hydrophilic sealant which swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 600ml

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=43mm, External diameter=45mm

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=26mm, External diameter=28mm

An acrylic sealing ring profile. It swells in contact with water to seal spacer bars / tie bars / tie rods. Unit Size: Internal Diameter=18mm, External diameter=20mm

A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 10mm x 10m

A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 5mm x 20m

A fast curing, non-swelling, 1-part adhesive with very high initial grab which bonds most common construction substrates. Can be used for adhering SikasSwell® Profiles within construction joints. Unit Size: 600ml sausage

A 1-component, very rapid-setting, early-strength gaining, magnesium phosphate-based patching and repair mortar for concrete. Unit Size: 22.7kg

A self-adhesive tape, with a carrier film and release liner, for internal jointing of Sikaproof A+ waterproofing system. Unit Size: 25m roll

A self‐adhesive tape, based on a polyacrylate adhesive on a yellow carrier film coated with the SikaProof A fully bonded system. Unit Sizes: 150mm x 25m roll

A double-sided adhesive overlap tape based on a polyacrylic adhesive sandwiched between release liners. Unit Size: Each

A synthetic rubber based, solvent-dispersed primer. Designed to be used as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 5kg

A synthetic rubber based, solvent-dispersed, primer for use as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 12.5kg

A single-sided, self-adhesive tape based on SikaProof® membrane, laminated with a butyl adhesive covered with a release liner. Unit Size: 200mm x 20m

A flexible polyolefin (FPO) self-adhesive sheet membrane. Designed to be used for post-applied fully bonded below ground waterproofing of existing reinforced concrete structures. Unit Size: 1m x 20m

A double-sided, self-adhesive tape based on a butyl rubber adhesive covered with a release liner Unit Size: 50mm x 20m

A self-adhesive tape based on a butyl adhesive for external jointing and detailing on SikaProof® A & P membrane systems. The tape is composed of a yellow carrier film and a divided release liner. Unit Size: Length 20m x Width 150mm

A preformed L-shaped SikaProof® A membrane sheet in 1.0 m width folded in 50/50 cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Unit Size: 1m x 25m

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 2m x 25m This product is not purchasable on the website. Please call or email to place your order.

An embossed polyolefin FPO sheet membrane for pre-applied fully bonded below ground waterproofing of reinforced concrete structures. Unit Sizes: 1m x 25m

A fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap. Unit Sizes: 2m x 30m This product is not purchasable on the website. Please call or email to place your order.