Sika

Sika®-1 Pre-bag Render Mortar is part of the Sika® 1 Pre-Bagged Structural Waterproofing System. Unit Size: 25kg

Sika 1 Finishing Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum application performance and durability. Unit Size: 25kg

Sika Screeding Mortar when mixed with water provides the multicoat components for the structural waterproofing systems Unit Size: 25kg bag

An epoxy-based, moisture tolerant, thixotropic, two-part structural adhesive, which bonds most construction materials. Unit Size: 2 part Pack (Part A 0.9kg, Part B 0.3kg)

Trak-It C5 Fuel cells are spare fuel cells to power the Trak-It C5 gas fixing tool. Each fuel cell contains enough gas to install over 800 fasteners. Unit Size: each

A fast curing, non-swelling, 1-part adhesive with very high initial grab which bonds most common construction substrates. Can be used for adhering SikasSwell® Profiles within construction joints. Unit Size: 600ml sausage

A cement based, one-component, rapid setting, shrinkage compensated repair concrete. Unit Size: 25kg

A one component cement based polymer modified general purpose repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN 1504-3. Unit Size: 25kg bag

A very low emission cement based self-levelling compound suitable for interior areas, characterised by good working properties. Suitable for castor chair rollers according to EN 12 529. Unit Size: 25kg

A 1-part, cementitious, fast hardening free flowing grout which is shrinkage compensated and achieves high early and final strengths. Unit Size: 25kg bag

A cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Unit Size: 25kg bag

A PVC drainage conduit for the control of water ingress in below ground waterproofing situations. It has a flange upstand and is fitted around the perimeter of the floor at the vulnerable wall to floor junction, directly any ingress of water towards a sump chamber or drain. Unit Size: each

A 1-part, cementitious polymer modified, low shrinkage surfacing/ finishing mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations. Unit Size: 25kg

A 1-part polyurethane hydrophilic sealant which swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 600ml

A cement based, low alkali, one -component micro concrete which has non-shrink properties. It offers a flowable repair mortar suitable for pouring applications meeting the requirements of Class R4 of EN 15.4-3. Unit Size: 25kg bag

A polymer modified, pumpable, self levelling fast drying cementitious screed for higher thickness interior or exterior floors, meeting the requirements of class R3 according to EN 1504-3. Unit Size: 25kg bag

A ready to use, self-setting paving jointing compound with Active Resin Technology for advanced durability. It sets hard and will not wash out, while still remaining water permeable. Unit Size: 15kg

A ready to use, self-setting paving jointing compound with Active Resin Technology for advanced durability. It sets hard and will not wash out, while still remaining water permeable. Unit Size: 14 kg (Deep Grey)

A 10mm bead of butyl rope, which is used to either wrap around the head of plugs in membrane installation, or to form a jointing waterproof seal on walls and floor membrane systems. Unit Size: 10mm wide x 5m long

A pre-mixed, one-part, cementitious, non-shrink bedding and repair mortar , suitable for the support of road ironwork and highway furniture. Unit Size: 25kg bag

A 1-component, fibre reinforced, low shrinkage repair mortar meeting the requirement of class-R4 of EN 1504-3. Unit Size: 25kg

A one-part, early ultra high strength grout with special shrinkage compensating components, which give a non-shrink grout in both the plastic and harden states. Unit Size: 25kg

A very low emission cement based self levelling compound for almost all substrates suitable for laying. It has very low shrinkage, very high strength and very rapid curing. Unit Size: 25kg bag

A one-part, pre-blended, coloured synthetic dry shake hardener for concrete comprising of cement, hard aggregates, compatible admixtures and pigment Unit Size: 25kg Bag