Sika Limited, the UK subsidary of the worldwide Sika Group, was established in 1927 and produces and markets a wide range of state-of-the-art systems.
Renowned innovators they manufacturer a huge range of products including: Concrete Repair, Joint Sealing, Waterproofing, Flooring, Passive Fire Protection and Roofing.
A fully bonded, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed polyolefin (FPO) based membrane laminated with a unique sealant and a non-woven fleece with a self-adhesive strip on the longitudinal side for the overlap. Unit Sizes: 1m x 30m
A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives. Trowel applied and thixotropic in nature. Unit Size: 15ltr
A 150mm wide tape which has many uses but is mostly used to seal membrane from walls to floors and the channel system. Tacky on one side only, this can also be used to overtape external joints and used on floor oversealing. Unit Size: 150mm x 20m
A one component, plasto-elastic coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0 °C. Sikagard®-550 W Elastic complies with the requirements of EN 1504-2 as protective coating. Unit Size: 15ltr
A post applied self-adhesive waterproofing sheet membrane. It is based on a top layer of polyethylene film bonded to a layer of bitumen/polymer adhesive carried on a release paper, with a selvedge strip. Unit Size: 1.05m x 19.05m
A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Unit Size: 25kg
A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 11.5ltr (Part A=8.89ltr, Part B=2.61ltr)
Steel and galvanised surface weather resistant coating. Icosit 6630 high-solid is a low solvent, oxidative drying high-build coating based on a specially modified synthetic resin. Unit Size: Can
An epoxy resin based mortar. It consists of a resin base, a hardener and a bag of specially graded fillers. The grading of the filling system enables application thicknesses of 20mm down to a featheredge. The mortar is suitable for placing using hand tools. Unit Size: 16.1kg (3 part product)
A 300mm wide bituminous gas-proof and damp-proof sheet, composed of self-adhesive SBS polymer modified bitumen and an upper surface finish of aluminium foil, and release film.
A synthetic rubber based, solvent-dispersed, primer for use as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 12.5kg
A 2 part, polyurea/polyurethane-hybrid primer for cementitious substrates. The rapid curing performance allows overcoating of Sika Liquid Applied Membrane (LAM) roofing systems after 30 minutes. Unit Size: 11.5ltr (Part A=9ltr, Part B=2.5ltr)
A rectangular acrylic sealing profile. It swells in contact with water to seal all types of construction joints and penetrations in concrete structures. Unit Size: 20mm x 10mm x 10m
A self-adhesive tape based on a butyl adhesive for external jointing and detailing on SikaProof® A & P membrane systems. The tape is composed of a yellow carrier film and a divided release liner. Unit Size: Length 20m x Width 150mm