Sika

A 1-component, solvent-based primer. Unit Size: 1L tin

The Sika flexible jetting eye has been designed to allow cleaning of the channel system and also an inspection port. The unique flexible upstand jetting point can be easily bent to allow the channel to be used in a wall port system. It also has the benefit of allowing slabs to be laid whilst still being easily accessible afterwards.

.

A 1-component, very rapid-setting, early-strength gaining, magnesium phosphate-based patching and repair mortar for concrete. Unit Size: 22.7kg

A solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Unit Sizes: 1000ml

Sikaplan® 1652 VOC Weld Strip is for use as an option strip for welding membranes. Unit Size: 100mm x 10m roll

Sika Plaster Plugs can be used with Sika mesh membrane systems and have a serrated head which can take plaster or dot and dab.

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 5ltr and 25 ltr

Sika 4 Rapid Setting is used to aid the quick setting of cement based renders and concretes where low water pressure or slow moving water exists. Unit Size: 5 ltr

The Sika Fuko Injection Junction Box can be installed in concrete construction joints to waterproof them and also to seal any cracks or voids in the joint areas. Unit Size: Box of 5

A mortar plasticiser in powder form for use as an alternative to lime or as a supplement to lime to aid mortar durability. Unit Size: 250 sachets in a tub

A double-sided, self-adhesive tape based on a butyl rubber adhesive covered with a release liner Unit Size: 50mm x 20m

A one part flowable shrinkage compensated general purpose cementitious mortar for waterproofing applications. Unit Size: 25kg

A 1-part, water-based, synthetic resin concentrate which is diluted with water and used to prime cementitious, wood and mastic asphalt floor substrates. Unit Size: 10kg

A solvent-based colourless clear adhesion promoter which reacts with moisture and deposits active groups on the substrate. Unit Size: 1ltr Tin

A single component, waterborne modified acrylic resin based intermediate and surface coating, containing an antimicrobial additive. Unit Size: 5ltr

Sika Bentoshield Granules are polymer modified natural sodium bentonite granules, when wetted these granules form a dense waterproof paste. Unit Size: 25kg

A one-component, crack-bridging, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. Unit Size: 20kg bag

A synthetic rubber based, solvent-dispersed primer. Designed to be used as an integral component of the SikaProof®/ SikaBits® self-adhesive sheet membrane waterproofing systems. Unit Sizes: 5kg

A two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. Unit Sizes: 25kg (20kg bag & 5kg pail)

A self healing waterproofing membrane that is resistant to contaminated soils, forming an automatic mechanical bond to freshly poured concrete. Unit Size: 1.1m x 5m rolls

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 4.5ltr (Part A=3.48ltr, Part B=1.02ltr)

A 2 part, epoxy based moisture tolerant, thixotropic, structural adhesive which bonds most construction materials. Unit Size: 2 part pack