Sika

A one-part, early ultra high strength grout with special shrinkage compensating components, which give a non-shrink grout in both the plastic and harden states. Unit Size: 25kg

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 25 ltr

A normal setting liquid waterproofing admixture for mortar and concrete. Unit Sizes: 5ltr and 25 ltr

An extra-quick setting liquid waterproofing admixture that causes almost immediate setting and very rapid hardening of Ordinary Portland Cement. Unit Size: 5ltr

Sika 4 Rapid Setting is used to aid the quick setting of cement based renders and concretes where low water pressure or slow moving water exists. Unit Size: 5 ltr

A rapid setting waterproofing admixture, which when mixed with ordinary Portland cement and water, sets rapidly to seal areas of severe water infiltration through concrete, rock or masonry. Unit Size: 5ltr

A cementitious epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. Unit Size: 20kg (A=1.14kg, B=2.86kg, C=16kg)

A one part, high flow, rapid strength cementitious grout. Unit Size: 25kg bag

The Sika Bentoshield Fixing Nose Piece is designed to support the washer on the end of the gun and hold it in place for safe and correct fixing of the Sika Bentoshield membrane system. Unit Size:

Sika Bentoshield fixing washers are special plastic washers used to fix Sika Bentoshield membrane to vertical surfaces and horizontal laps. Unit Size:

Sika Bentoshield Granules are polymer modified natural sodium bentonite granules, when wetted these granules form a dense waterproof paste. Unit Size: 25kg

A self healing waterproofing membrane that is resistant to contaminated soils, forming an automatic mechanical bond to freshly poured concrete. Unit Size: 1.1m x 5m rolls

A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives. Trowel applied and thixotropic in nature. Unit Size: 15ltr

A galvanised steel bonding strip with 5mm holes at 15mm centres in a solid plastic holder. Unit Size: 12mm wide x 10m long x 1mm thick

A bitumen solution to be used in conjunction with Sika BituSeal S-115. Unit Sizes: 25ltr, 5ltr

A bitumen solution to be used in conjunction with Sika BituSeal S-115. Unit Sizes: 25ltr, 5ltr

A post applied self-adhesive waterproofing sheet membrane. It is based on a top layer of polyethylene film bonded to a layer of bitumen/polymer adhesive carried on a release paper, with a selvedge strip. Unit Size: 1.05m x 19.05m

A blend of high-grade silicates and wetting agents, held in suspension with water as a carrier. Once applied to the concrete surface, this unique product seals the concrete surface. Unit Size: 25kg

The Sika Cavity Drainage System Corner Piece is installed at the corners of a perimeter drainage channel system to allow continuity of the drainage system.

The Sika Cavity Drainage System Channel T Piece is installed at the junction between wall and cross channel drainage system to allow continuity of the drainage system.

A 150mm wide tape which has many uses but is mostly used to seal membrane from walls to floors and the channel system. Tacky on one side only, this can also be used to overtape external joints and used on floor oversealing. Unit Size: 150mm x 20m

.

A 10mm bead of butyl rope, which is used to either wrap around the head of plugs in membrane installation, or to form a jointing waterproof seal on walls and floor membrane systems. Unit Size: 10mm wide x 5m long

A PVC drainage conduit for the control of water ingress in below ground waterproofing situations. It has a flange upstand and is fitted around the perimeter of the floor at the vulnerable wall to floor junction, directly any ingress of water towards a sump chamber or drain. Unit Size: each

A drainage outlet that can be used to get water from the channels to the sump chamber or existing drain. The angle bend on the underside of the channel takes water through a 32mm connection.

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length Varying widths available: 10, 20, 30cm

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length Varying widths available: 10, 20, 30cm

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joits. Unit Size: 1 roll of 25m length, thickness 1mm Varying widths available: 10, 20, 30cm

A flexible waterproofing tape based on modified flexible Polyolefin (FPO) with advanced adhesion properties. It has red masking tape on one side for easier application over expansion joints. Unit Size: 25m long x 2mm thick x 200mm width

A 2 part, polyurea/polyurethane-hybrid primer for cementitious substrates. The rapid curing performance allows overcoating of Sika Liquid Applied Membrane (LAM) roofing systems after 30 minutes. Unit Size: 11.5ltr (Part A=9ltr, Part B=2.5ltr)

A one part polymer modified cement based waterproof coating comprising of special cement based components and admixtures. When mixed with water a slurry or mortar material is produced for direct application to a variety of construction substrates. Unit Size: 25kg bag

A flexible waterproofing tape on polyvinyl chloride (PVC) with advanced adhesion properties. The tape seals construction and connection joints on concrete or metal substrates. Unit Sizes: 1.6mm thickness x 30m length x 220mm width

A high density polyethylene (HDPE), heavy duty drainage and protection sheet with 10mm high dimples on the bottom layer and a bonded geotextile (PP) filtration layer on the top layer. Unit Size: 2,44m width x 12,50m length

Sika Dustproofer forms hard insoluble crystals binding together the particles and sealing the surface to form hard impermeable non-dusting concrete and paving. Unit Size: 5 ltr

A ready to use, self-setting paving jointing compound with Active Resin Technology for advanced durability. It sets hard and will not wash out, while still remaining water permeable. Unit Size: 15kg

A ready to use, self-setting paving jointing compound with Active Resin Technology for advanced durability. It sets hard and will not wash out, while still remaining water permeable. Unit Size: 14 kg (Deep Grey)

A surface applied mixed corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete. Unit Size: 25ltr

Sika 1 Finishing Mortar is part of the Sika 1 Pre-Bagged Structural Waterproofing System. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum application performance and durability. Unit Size: 25kg

The Sika flexible jetting eye has been designed to allow cleaning of the channel system and also an inspection port. The unique flexible upstand jetting point can be easily bent to allow the channel to be used in a wall port system. It also has the benefit of allowing slabs to be laid whilst still being easily accessible afterwards.

The Sika Fuko Injection Junction Box can be installed in concrete construction joints to waterproof them and also to seal any cracks or voids in the joint areas. Unit Size: Box of 5

A re-injectable hose for sealing various construction and connection joints in watertight concrete structures. Unit Size: Supplied as a Combi-pack in a cardboard box containing: ▹ 200m SikaFuko VT 1 ▹ 10m green PVC-hose (inlet) ▹ 10m white PVC-hose (outlet) ▹ Accessories: (2m connecting pipe, 4m heat shrink sleeve, x 50 closure plugs, 1 can of glue, 1 roll of tape, x 800 fasttening clips)

A high-density polyethylene, high capacity cavity drainage membrane. Unit Size: 2m x 20m long

A 1 component, moisture-curing, low-modulus elastic joint sealant. Unit Size: 600ml foil pack

Steel and galvanised surface weather resistant coating. Icosit 6630 high-solid is a low solvent, oxidative drying high-build coating based on a specially modified synthetic resin. Unit Size: Can

A 1-part, polymer modified, ready to use bitumen emulsion primer. Unit Size: 10 ltr

A 2 component polymer modified bituminous flexible thick coating extended with fibre for waterproofing against dampness and moisture ingress. Unit Size: 32kg (Part A-Liquid=24kg, Part B-Powder=8kg)

A 1-part, cementitious, polymer modified coating material used as bonding primer and reinforcement corrosion protection. It contains recycled waste materials which leads to a reduced carbon footprint compared to an equivalent performing mortar. Unit Size: 25kg

A one component cement based polymer modified general purpose repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN 1504-3. Unit Size: 25kg bag

A one part flowable shrinkage compensated general purpose cementitious mortar for waterproofing applications. Unit Size: 25kg

A 1-part, cementitious polymer modified, low shrinkage surfacing/ finishing mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations. Unit Size: 25kg

A 1-part, cementitious, fibre reinforced, low shrinkage repair mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations. Unit Size: 25kg bag

A 1-component, fibre reinforced, low shrinkage repair mortar meeting the requirement of class-R4 of EN 1504-3. Unit Size: 25kg

A cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Unit Size: 25kg bag

A one component cement based polymer modified high build repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN1504-3. Unit Size: 25kg bag

A one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3. Unit Size: 25kg bag

Sika Plaster Plugs can be used with Sika mesh membrane systems and have a serrated head which can take plaster or dot and dab.

.

Sika®-1 Pre-bag Render Mortar is part of the Sika® 1 Pre-Bagged Structural Waterproofing System. Unit Size: 25kg

Sika®-1 Pre-bag Spritz Mortar is part of the Sika® 1 Pre Bagged Structural Waterproofing System. Unit Size: 25kg

A non-sag, 1-component polyurethane of paste-like consistency for structural joints in ventilated facades and interior wall cladding between the vertically installed substructure and the panel that will be subjected to high dynamic and static stresses. It cures on exposure to atmospheric humidity. Unit Size: 600ml

A solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Unit Sizes: 1000ml

A solvent blend used in combination with epoxy or polyurethane based products and membranes. Unit Size: 3ltr

Sika® Brick plugs are 10mm fixings to use with membrane systems, with the advantage of a rubber seal already attached. Unit Size: 200 per box

A 2-part epoxy based thixotropic adhesive for bonding the Sikadur-Combiflex® SG modified flexible Polyolefin (FPO) waterproofing tapes to different substrates. Unit Size: 6kg (A+B)

A 1-part moisture curing elastic adhesive and sealant. It has good and durable adhesion to most construction materials. Unit Size: 600ml

A 1-part moisture curing elastic adhesive and sealant. It is used for interior and exterior multipurpose bonding and joint sealing. It has good and durable adhesion to most construction materials. Unit Size: 600ml

A 1-component, moisture curing, elastic joint sealant. Unit Size: 600ml

A 1-component, moisture-curing, elastic joint sealant with high mechanical and chemical resistance. Suitable for use in hot and tropical climatic conditions. Unit Size: 600ml

A 1-component, moisture-curing, self-leveling, elastic joint sealant with high mechanical and chemical resistance. Unit Size: 600ml

A 1-component, moisture-curing, self-leveling, elastic joint sealant with high mechanical and chemical resistance. Unit Size: 600ml

A 1-component, moisture-curing, elastic joint sealant. Unit Size: 600ml

A 1-part, water-based, synthetic resin concentrate which is diluted with water and used to prime cementitious, wood and mastic asphalt floor substrates. Unit Size: 10kg

A very low emission cement based self-levelling compound suitable for interior areas, characterised by good working properties. Suitable for castor chair rollers according to EN 12 529. Unit Size: 25kg

A latex modified cement based powder which when mixed with water, can be used to level out uneven floors and screeds.

Unit Size: 20kg bag

A 1-part, thick bed, cement-based smoothing and resurfacing compound for levelling out very uneven floors and screeds up to a depth of 50 mm in one coat. Unit Size: 25kg

A very low emission cement based self levelling compound for almost all substrates suitable for laying. It has very low shrinkage, very high strength and very rapid curing. Unit Size: 25kg bag

A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete. Unit Sizes: 205ltr

A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete. Unit Sizes: 25 ltr

A polymer modified, pumpable, self levelling fast drying cementitious screed for higher thickness interior or exterior floors, meeting the requirements of class R3 according to EN 1504-3. Unit Size: 25kg bag

A solvent based, clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete. Unit Size: 200ltr

A one part low odour, clear acrylic resin polymer solution. For use to curing, hardening and sealing fresh or hardened concrete. Unit Sizes: 200ltr

A one part low odour, clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete. Unit Sizes: 25ltr

A one part water dispersed acrylic emulsion, used to cure, harden and seal fresh or hardened concrete. Unit Size: 25ltr

A single component, waterborne modified acrylic resin based intermediate and surface coating, containing an antimicrobial additive. Unit Size: 5ltr

A one component, plasto-elastic coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0 °C. Sikagard®-550 W Elastic complies with the requirements of EN 1504-2 as protective coating. Unit Size: 15ltr

A one part flowable shrinkage compensated general purpose cementitious grout. Meets the requirements of EN 1504-6: Anchoring of reinforcing bars. Unit Size: 25kg bag

A 1-part, cementitious, fast hardening free flowing grout which is shrinkage compensated and achieves high early and final strengths. Unit Size: 25kg bag

A one-component, crack-bridging, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. Unit Size: 20kg bag

A two component, solvent free, highly elastic, low odour polyurea hybrid waterproofing membrane. Unit Size: 25kg (Part A= 9.2kg, Part B=15.8kg)

A two part, elastic, 100% solids, very fast curing and coloured Polyurethane/ Polyurea-Hybrid liquid applied membrane with moderate chemical resistance. Unit Size: Part A=211kg, Part B=202kg

A two part, elastic, 100 % solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance. Unit Size: Part A=212kg, Part B=191kg

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 4.5ltr (Part A=3.48ltr, Part B=1.02ltr)

A two-component, anticorrosive primer for exposed metal substrates and blocking primer over bituminous felts and coatings. Unit Size: 5ltr (Part A=2.5ltr, Part B=2.5ltr)

A two-component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates. Unit Sizes: 11.5ltr (Part A=8.89ltr, Part B=2.61ltr)

A 300mm wide bituminous gas-proof and damp-proof sheet, composed of self-adhesive SBS polymer modified bitumen and an upper surface finish of aluminium foil, and release film.

A multi-layer, low density polyethylene membrane, reinforced with a polypropylene reinforcing grid with an integral aluminium foil. Unit Size: 2m x 50m roll This product is not purchasable on the website. Please call or email to place your order.

Sikaplan®-1651 Loose VOC Gas Barrier is specifically designed, manufactured, tested and certified to perform as a methane, carbon dioxide, radon, ground gas, VOC, air and moisture and hydrocarbon protection system. Unit Size: 2m x 50m roll This product is not purchasable on the website. Please call or email to place your order.