A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating.
Unit Size: 20kg (2-part)
A damp proof course/cavity tray, suitable for use in masonry where resistance to carbon dioxide, methane and hydrocarbon is required.
Unit Size:
450mm wide x 20m long roll
A damp proof course/cavity tray, suitable for use in masonry where resistance to carbon dioxide, methane and hydrocarbon is required.
Unit Size:
600mm wide x 20m long roll
A damp proof course/cavity tray, suitable for use in masonry where resistance to carbon dioxide, methane and hydrocarbon is required.
Unit Size:
900mm wide x 20m long roll
A 0.5mm thick, unique blended polyethylene membrane, for use where protection against ground gas and hydrocarbons are required.
Unit Size: 2m wide x 50m long
A single-sided self-adhesive PVC tape for sealing edges of lapped product. The tape is generally used to seal down loose edges formed as a result of lapping gas resisting membranes.
Unit Size: 100mm wide x 50m long roll
A strong polypropylene woven mesh, partially embedded into a self-adhesive polymer/bitumen compound, with a release coated inter-leave.
Unit Size: 75mm wide x 20m long
A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper.
Unit Size: 1m x 20m long
A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper.
Unit Size: 300mm x 20m
RIW Granules are chemically treated sodium bentonite granules, which are used as a detailing accessory product, with the Structureseal system.
Unit Size: 20kg bag
A cold applied, bitumen based coating, which dries to form a uniform UV resistant and waterproof layer.
The coating is a fibre and mineral filled solution of natural and petroleum bitumens in white spirit.
Unit Size: 20 ltr
A crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints.
Unit Size: 25kg
A cementitious crystalline slurry that is applied to horizontal and vertical construction joints to provide additional waterproofing protection, and protect rebar from corrosion.
Unit Size: 25kg
KIM contains Krystol technology, when added to concrete, Krystol chemically reacts with water and dehydrated cement particles to form insoluble needle-shaped crystals that fill capillary pores and micro-cracks in the concrete and block the pathways for water and waterborne contaminants.
Unit Size: 8kg Bags
RIW Krytonite Adhesive is specially designed to adhere Krytonite Swelling Waterstop to concrete construction joints and penetrations that require waterproofing.
Krytonite Adhesive has incredible bonding strength, even on damp concrete surfaces and can be used in all seasons.
Unit Size: 290ml