R.I.W. Waterproofing

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr & 20ltr packs (two part product) Grey or Black

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr & 20ltr packs (two part product) Grey or Black

A cold applied, fast drying, two coat black bitumen coating, which dries to form a water and water vapour barrier. Unit Sizes: 25 ltr and 205 ltr

A cold applied combination of impermeable high density polyethylene sheet and permeable geotextile filter fabric. Unit Size: 2m x 20m long rolls This product is not purchasable on the website. Please call or email to place your order.

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 20kg (2-part)

RIW R20 Cavity Drain is manufactured from 1mm thick black high density polyethylene with studs approximately 20mm high. Unit Size: 2m wide x 20m long

.

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 1m x 20m long

A two-pack solvent free black liquid modified epoxide surface conditioner that can be applied to damp surfaces. Unit Size: 5ltr or 15 ltr (2-part)

RIW Cavity Drain R7 is manufactured from 0.5mm translucent virgin high density polyethylene with studs approximately 8mm high. Unit Size: 2m wide x 20m long

A cold applied, high density polyethylene film, coated with a bitumen/rubber self-adhesive layer with a removable reinforced silicone paper.

Unit Size: 1m x 20m roll

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr & 20ltr packs (two part product) Grey or Black

A solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in pre-measured proportions. Unit Sizes: 5ltr

An advanced, elastomeric, highly tear resistant, breathable, waterproof composite tape. Unit Size: 120mm wide x 10m long roll

A cold applied, bitumen based coating, which dries to form a uniform UV resistant and waterproof layer. The coating is a fibre and mineral filled solution of natural and petroleum bitumens in white spirit. Unit Size: 20 ltr

A trowel-grade, sodium bentonite/butyl-rubber based sealant, designed for use with the Structureseal system. Unit Size: 15 ltr tub

.

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 25 ltr

A two component, polymer modified, flexible, cement based, waterproof coating for concrete and masonry. Unit Size: 20kg

A crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints. Unit Size: 25kg

A cementitious crystalline slurry that is applied to horizontal and vertical construction joints to provide additional waterproofing protection, and protect rebar from corrosion. Unit Size: 25kg

.

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

A cold applied, high density polyethylene film bonded to aluminium foil and coated with bitumen/rubber self adhesive layer with a removable reinforced silicone release paper. Unit Size: 300mm x 20m

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A two pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating. Unit Size: 5kg (2-part)

A two-pack solvent free black liquid modified epoxide surface conditioner that can be applied to damp surfaces. Unit Size: 5ltr or 15 ltr (2-part)

RIW Sheetseal Primer is a bitumen solution. Unit Size: 5 ltr, 25ltr

.

A cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Unit Sizes: 150mm x 20m long 300mm x 20m long

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A bitumen/rubber self-adhesive tape for use over Toughseal when reinforcing joints etc internally, prior to tiling. Unit Size: 100mm wide x 20m long roll

.

Brick plugs fitted with watertight seal. Unit Size: Pack of 100

A thixotropic, polymer modified, cement based, waterproof, engineering quality fairing coat. Unit Size: 20kg

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A cold applied, fast drying, two coat black bitumen coating, which dries to form a water and water vapour barrier. Unit Sizes: 25 ltr and 205 ltr

A two component, polymer modified, cement based, waterproof coating for concrete and masonry. Unit Size: 15kg (two part)

A thixotropic, polymer modified, cement based, waterproof, rapid hardening, high build repair mortar. Unit Size: 20kg

A synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stops water. Unit Size: 10m roll

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A double-sided butyl tape. Unit Size: 100mm wide rolls x 15m long

A multi-functional, water based primer/curing agent, formulated on an aqueous acrylic copolymer. Unit Size: 5ltr bottle

A aromatic hydrocarbon solvent; Contains Xylene. Unit Size: 5 ltr tin

RIW Granules are chemically treated sodium bentonite granules, which are used as a detailing accessory product, with the Structureseal system. Unit Size: 20kg bag

A double-sided bitumen/rubber self-adhesive tape with a removable silicone release paper one side and a thin polyethylene removable sheet on the other. Unit Size: 150mm wide rolls x 15m long

A cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Unit Sizes: 150mm x 20m long 300mm x 20m long