R.I.W. Waterproofing

A self-adhesive vinyl tape. Unit Size: 48mm wide rolls x 50m long

Used to join two pieces of Aqua Channel together.

RIW Krytonite Adhesive is specially designed to adhere Krytonite Swelling Waterstop to concrete construction joints and penetrations that require waterproofing. Krytonite Adhesive has incredible bonding strength, even on damp concrete surfaces and can be used in all seasons. Unit Size: 290ml

A flat sheet, made of organic fibres saturated with bitumen. The board is resistant to water, ground salts and most corrosive chemicals. Unit Size: 3mm x 900mm x 2020

.

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

RIW Sheetseal Primer is a bitumen solution. Unit Size: 5 ltr, 25ltr

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

RIW Aqua Channel is pre-formed in a pentagonal shape, with pre-drilled 19mm holes at 70mm centres along its length. Aqua Channel is an internal peripheral PVC drainage conduit that has been specifically designed for the control of water ingress in below ground situations. Unit Size: 2m lengths

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

Pre-fabricated 'top-hat' sections for use around incoming pipes. Unit Size: 110mm diameter, 130mm diameter, 160mm diameter

RIW Aqua Channel Outlet consists of a 90° bend, with a male coupling, which is fitted to the base of a 200mm length of Aqua Channel; allowing water to be taken from the channel to the water collection point.

.

Used at changes in direction of the Aqua Channel.

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish. The coating is a solution of natural and petroleum bitumens in white spirit. Unit Sizes: 5 ltr and 25 ltr

A sodium bentonite based material designed to stop water infiltration through insitu concrete construction joints. Unit Size: 25 x 19mm, supplied in 5m long coils

A high performance polymeric material, available in widths from 100mm to 1000mm, supplied in rolls 20m long. Unit Size: Length 20m long rolls Widths (various available) 100,150, 225, 300, 375, 450, 600, & 1000mm

KIM contains Krystol technology, when added to concrete, Krystol chemically reacts with water and dehydrated cement particles to form insoluble needle-shaped crystals that fill capillary pores and micro-cracks in the concrete and block the pathways for water and waterborne contaminants. Unit Size: 8kg Bags

Unit Size: Roll

A cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Unit Sizes: 150mm x 20m long 300mm x 20m long

A double-sided bitumen/rubber self-adhesive tape with a removable silicone release paper one side and a thin polyethylene removable sheet on the other. Unit Size: 150mm wide rolls x 15m long