GCP Waterproofing

GCP Betec Mesh is a reinforcing mesh for use where substreate cracking has or is likely to occur.

An economical low capacity, low friction bearing strip which can be used under in-situ or precast concrete slabs and beams, structural steelwork bearing plates and pipe support to form a thin sliding joint.

Unit Size: Roll

GCP Serviseal AT 240 is an important advance in concrete joint protection which combines Active Technology with the conventional mechancial properties of PVC waterstops, developed for water exclusing and retaining structures such as basements, reservoirs, sewage treatment works etc. Unit Size: 7.5 m long coil

GCP Hydroduct CF is a high density polyethylene combined cavity former and vapour barriers for drained BS 8102:2009 Type C basement construction. Hydroduct CF 20 is used for forming drained cavities horizontally and vertically. Hydroduct CF 08 is used for forming drained cavities horizontally and vertically in lower risk applications. Unit Size: Hydroduct CF 20: 2m x 20m roll Hydroduct CF 08: 2.4m x 20m roll

GCP Hydroduct CF is a high density polyethylene combined cavity former and vapour barriers for drained BS 8102:2009 Type C basement construction. Hydroduct CF 20 is used for forming drained cavities horizontally and vertically. Unit Size: 2m x 20m roll This product is not purchasable on the website. Please call or email to place your order.

.

GCP Slipstrip 2 is low capacity bearing slips made from dense extruded polyethylene sheet for fixed end rotation joints or as a low friction, structural slip membrane. Unit Size: 300mm wide, 1.5mmn thick x 25m rolls

GCP GGM400 Gas Membrane is a loose laid sheet membrane system designed to protect buildings against the ingress of methane, radon, carbon dioxide, hydrocarbon vapours and water vapour. Unit Size: 2m x 50m roll This product is not purchasable on the website. Please call or email to place your order.

GCP Preprufe 800PA LT is an advanced, self-adhesive Preprufe Membrane for protection of below ground structures. Preprufe 800PA Low Temperature (LT) Membrane for low temperature applications when surface and ambient temperatures are between -5°C and 20°C. Unit Size: 1.2m x 35m roll

GCP Hydroduct 200 is a polypropylene non-woven filter fabric on one face of a 12mm studded drainage core. Applied to walls of basements that have been waterproofed with Bituthene membranes and Servipak protection boards. Unit Size: 1.25m x 32m x 12mm

GCP Hydroduct 200 is a polypropylene non-woven filter fabric on one face of a 12mm studded drainage core with a pressure dissipation plastic film bonded to the other face. Applied to walls of basements that have been waterproofed with Bituthene membranes. Also applied to existing basement walls and permanent shuttering prior to the application of Preprufe membranes. Unit Size: 1.25m x 32m x 12mm

GCP Preprufe 300R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating. Unit Size: Roll

.

GCP Preprufe 160R is unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protecting coating. Unit Size: Roll

GCP Preprufe 160 Flex is a pre-applied flexible waterproof membrane that develops an adhesive bond to poured concrete for irregular permanent formwork. Unit Size: 1.2m x 35m roll

GCP Preprufe 300 LT Plus is the latest generation of Preprufe membranes with the unique Preprufe ZipLap seam. Unit Size: Roll

GCP Preprufe 160 LT Plus is the latest generation of Preprufe membranes with the unique Preprufe ZipLap seam. Unit Size: Roll

GCP Adcor 550MI kit is a double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop. Unit Size: Each box contains: Adcor 500MI 8 x 5m rolls (40m) Reinforced PVC tube 4m + 16 caps Blue Trumpets 16 pieces Adcor 550MI clips 175 pieces PVC tube clips 16 pieces

.