Fosroc

Fosroc Proofex Angle Fillets are strips fixed at all floor and wall junctions with a 6mm bead of Nitoseal MB175.

Fosroc Cavitydrain membranes are manufactured from chemically resistant high density polyethylene in a range of stud depths designed to permit high water flow through a permanent void formed against a substrate. Fosroc Proofex Cavitydrain 80 is a space saving solution for vertical applications in conjunction with internal blockwork walls and dry lining systems. Unit Size: 2.07m x 20m

A two-component, fast-setting, flexible and tough epoxy system. Unit Size: 6 x 560ml sachet units (includes 3 static mixers)

A robust, pre-applied, fully bonded, gas-resistant, waterproofing membrane for use in below ground, reinforced concrete structures. Unit Size: 1.27m x 30m

A reinforced, double sided waterproof adhesive tape for sealing and jointing roll ends, cut edges and corner pieces. Unit Size: 200mm x 10m x 1.5mm

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

A 125mm corner piece made from polyethylene membrane with a 100mm butyl selvedge for use in conjuction with Proofex L Section.

A 10m long x 250mm wide section of polyethylene with 2butyl selvedge strips. It is used by bending at 90° along its length for application between horizontal and vertical membrane to provide waterproofing continuity and it also connects with internal and external corner pieces. Proofex L section is supplied with a butyl "closure" strip at each end. Unit Size: 125mm x 125mm x 10m

A two component bituminous liquid membrane for waterproofing of underground structures and intricate details in conjunction with Proofex waterproofing systems. Unit Size: 28kg pack

A reinforcing mesh for use in conjunction with Proofex LM for angles and pipe penetrations etc. Unit Size: 100mm x 50m

A bitumen impregnated board, designed to protect membranes from damage through backfilling and trafficking.

A geocomposite drainage sheet with a 8mm thick HDPE cuspated core and non-woven polypropylene geotextiles, recommended for most building and civil engineering drainage applications. Unit Size: 2.4m x 20m roll

A pre-formed pipe collar with a flat based to simplify pipe penetration details. Available in standard diameters 110mm and 160mm.

A pre-formed pipe collar with a flat based to simplify pipe penetration details. Available in standard diameters 110mm and 160mm.

A BBA approved high performance, totally gas-impervious, reinforced membrane. It is a black/white, multi-layer, low density polyethylene, ground gas resistant based membrane with an integral aluminium foil layer and a polypropylene reinforcing grid. Unit Size: 2m x 50m roll This product is not purchasable on the website. Please call or email to place your order.

A 50mm wide double-sided butyl tape for sealing lap joint and for use in detailing work. Unit Size: 50mm x 30m x 1.5mm

A high performance epoxy waterproof resin for detailing of waterproofing and ground gas protection systems. It is a three component system consisting of base resin, liquid hardener and specially graded inert fillers. It is suitable for thicknesses from 20-100mm. Unit Size: 15 ltr packs containing liquid, base and hardener.

A polymer modified, fibre reinforced, low rebound, dry spray repair mortar conforming to the requirements of BS EN 1504-3 Class R4. Renderoc DS is supplied as a ready to use blend of dry powders which is formulated for application using the dry spray process. Unit Size: 25kg bag

A cementitious, polymer modified fairing coat, designed for vertical and overhead use to infill honeycombing and voids up to 3mm deep in the surface of concrete which is not trafficked and is subsequently coated. Unit Size: 25kg bag

A general purpose cementitious repair mortar which has been specifically engineered for vertical repair work. It can be applied in sections up to 70mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork. Unit Size: 25kg bag

A high performance lightweight concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R2. Renderoc HB has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 100mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork. Unit Size: 18kg bag

A high performance fibre reinforced lightweight concrete reinstaement mortar conforming to the requirements of BS EN 1504-3 Class R3. Renderoc HB30 has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 85mm thickness in vertical locations and up to 75mm thickness in overhead locations in a single application and without the use of formwork. Unit Size: 22kg bag

A high performance, hand/wet-spray applied, fibre reinforced high build, high strength, concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R4. Renderoc HB45 has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 80mm thickness in vertical locations and up to 70mm thickness in overhead locations in a single application without formwork. Unit Size: 25kg bag