Fosroc

A modified acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. Unit Size: 5 ltr

A modified acrylic emulsion which is specially designed for use as a bonding aid, curing agent and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external application. Unit Size: 5ltr

A resin jointing and repair compound, based on a polyester resin system, for general purpose use. Unit Size: 14kg

A reinforced, double sided waterproof adhesive tape for sealing and jointing roll ends, cut edges and corner pieces. Unit Size: 200mm x 10m x 1.5mm

A multi-component, polysulfide sealant best for joints in horizontal surfaces. Unit Size: 5L Can

A two part filled epoxy used to seal over the cracks in structural materials such as concrete. Unit Size: 5.5ltr

A high efficiency, water based curing membrane for concrete. Unit Size: 20L Drum

An anti-corrosion primer for exposed steel reinforcement, for use with Fosroc concrete repair mortars. Unit Size: 1.9ltr and 800ml cans

Fosroc Supercast Rearguard sections incorporate a flat top center box, allowing movement to be accommodated in expansion joints. They also provide a seat to support joint fillers. Unit Size: 150mm x 12m Roll

Fosroc Galvafroid zinc rich cold galvanising coating is formulated as an easily applied protection against corrosion on all ferrous metals. Galvafroid has a mid-grey matt finish. Unit Size: 1.9 ltr

A 5mm x 20mm swellable waterstop that can be installed and positively linked into conventional Supercast PVC waterstop networks. Supercast SW10 is made from high performance synthetic elastomeric strips. Unit Size: 5mm x 20mm x 15m roll

An externally placed waterstop for use where the joint line coincides with a change in level of the slab soffit. Unit Size: 3m lengths

A 10mm x 20mm swellable waterstop that can be installed and positively linked into conventional Supercast PVC waterstop networks. Supercast SW20 is made from high performance synthetic elastomeric strips. Unit Size: 10mm x 20mm x 5m roll

A 100% solids solvent-free epoxy resin containing pigments and fine filler. It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use. Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved. Unit Size: 2.5kg

A two component solvent based epoxy resin primer. Unit Size: 750ml

Fosroc Supercast Rearguard sections incorporate a flat top center box, allowing movement to be accommodated in expansion joints. They also provide a seat to support joint fillers. Unit Size: 150mm x 12m Roll

A cross linked, semi-rigid, closed cell polyethylene sheet material used for forming or filling expansion joints between adjacent in-situ or precast components. Hydrocell XL provides excellent support back to elastomeric sealants and is especially recommended for use in expansion joints in brickwork and in the construction of water retaining and water excluding structures. Unit Size: 25mm x 1000mm x 2000mm

A two part polyurethane sealant which is cold applied designed for joints in concrete paved areas. Unit Size: 5L Can

A two component cementitious slurry material comprising specially selected cementitious powders and liquid polymer additives. The mixed slurry is applied to properly prepared concrete, the specific Renderoc repair material is then compacted into the primer whilst this is still wet. Unit Size: 20kg Part A & 5 ltrs Part B

A rapid setting mortar which is easy to apply to horizontal, vertical or overhead surfaces at a wide range of thickness. Unit Size: 25kg

A high performance, multi-purpose cementitious protective coating, fairing and levelling mortar for applications from feather edge to 5mm, conforming to the requirements of BS EN 1504-3 Class R4. Unit Size: 20kg powder & 5 ltr liquid

A high performance fibre reinforced lightweight concrete reinstaement mortar conforming to the requirements of BS EN 1504-3 Class R3. Renderoc HB30 has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 85mm thickness in vertical locations and up to 75mm thickness in overhead locations in a single application and without the use of formwork. Unit Size: 22kg bag

A grey, elastomeric water-swellable paste which is applied like a sealant. The hydrophilic properties of supercast SWX display good consistency in swell rate during repeated wet/dry cycling. Expansion of the product on contact with water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water. Unit Size: 600ml

A high performance, hand/wet-spray applied, fibre reinforced high build, high strength, concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R4. Renderoc HB45 has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 80mm thickness in vertical locations and up to 70mm thickness in overhead locations in a single application without formwork. Unit Size: 25kg bag

(FOR FOILED PRODUCTS - SAUSAGES)