Fosroc

Fosroc Nitokit Accessory pack contains an injection gun, plastic bucket, goggles and 5.5L nitokit surface sealant. Unit Size: pack

An epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 and BS EN 1504-6 Anchoring of reinforcing steel bar. Conbextra EPR is for grouting gap thicknesses from 10 to 120mm. Unit Size: 15 ltr packs, containing base, hardener and filler

A two component bituminous liquid membrane for waterproofing of underground structures and intricate details in conjunction with Proofex waterproofing systems. Unit Size: 28kg pack

Fosroc Proofex Angle Fillets are strips fixed at all floor and wall junctions with a 6mm bead of Nitoseal MB175.

A 10m long x 250mm wide section of polyethylene with 2butyl selvedge strips. It is used by bending at 90° along its length for application between horizontal and vertical membrane to provide waterproofing continuity and it also connects with internal and external corner pieces. Proofex L section is supplied with a butyl "closure" strip at each end. Unit Size: 125mm x 125mm x 10m

A low viscosity system for the injection of cracks between 0.3mm and 9mm wide in concrete and masonry, where both sides of the crack can be sealed to prevent resin drainage. Unit Size: 3 ltr pack (2 x 1.5ltr units each consisting of base & hardener)

Fosroc P7 Primer can be used on porous surfaces with thioflex 600 pouring grade and gun grade sealants Unit Size: 5L Can

A two component, polysulfide self-levelling sealant designed for pavement applications. Unit Size: 5L pack

A 600ml gun to be used as part of the Proofex EFS range. Unit Size: Each

An epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 and BS EN 1504-6 Anchoring of reinforcing steel bar. Conbextra EP10 is for grouting gap thicknesses from 0.25 to 10mm. Unit Size: 3ltr pack containing liquid and hardener, 2 x 1.5 ltr units

A 100% solids solvent-free epoxy resin containing pigments and fine filler. It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use. Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved. Unit Size: 4.5kg

A single part bitumen latex emulsion, applied by brush or squeegee. The incorporation of rubber latex imparts elasticity to the dried coating. Mulseal DP is suitable for use on most building materials such as concrete, brickwork, metals and stone. Unit Size: 25ltr

A high build epoxy coating, non-toxic for application to damp surfaces. Unit Size: 2.5kg packs

A high build epoxy coating, non-toxic for application to damp surfaces. Unit Size: 2.5kg packs

A specially developed solvent blend for use to clean resin commonly found in Fosroc solvent based products. Unit Size: 5L Drum

A resin jointing and repair compound, based on a polyester resin system, for general purpose use. Unit Size: 2.7kg can only

A hot poured, high extension polymer modified bitumen sealant complying with the requirements of BS 2499:1993 type N1. Unit Size: 15kg

A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures. Unit Size: 18.2kg bag powder component, 5kg liquid polymer component Available in grey and white.

A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures. Unit Size: 18.2kg bag powder component, 5kg liquid polymer component Available in grey and white.

A water based concrete curing compound based on a low viscosity wax emulsion. It is supplied as a white emulsion which forms a clear film on drying. Unit Size: 20ltr drum

A thixotropic epoxy resin injection grout developed for the injection of cracks 0-.5 to 9mm wide in concrete and masonry, and has been specially formulated to minimise the drainage of resin from cracks which are incompletely sealed. Unit Size: 1 ltr pack

A high strength epoxy mortar, based on a high qaulity solvent-free epoxy resin system. The special silica aggregates provide high strength and excellent abrasion resistance. Unit Size: 16kg