Fosroc Concrete Repair

Fosroc P7 Primer can be used on porous surfaces with thioflex 600 pouring grade and gun grade sealants Unit Size: 5L Can

Fosroc P7 Primer can be used on porous surfaces with thioflex 600 pouring grade and gun grade sealants Unit Size: 500ml Can

Fosroc P20 Primer is a single component, chemically active, high performance primer.

Unit Size: 5L can

A high performance single component primer. Unit Size: 500ml

A two-component gun grade elastomeric sealant for limited movement joints. After mixing, the resultant compound will cure to provide an exceptionally robust seal, while retaining a degree of flexibility. Nitoseal PU800 can be used in joints between 5mm and 50mm wide. Unit Size: 2 x 2ltr

An anti-corrosion primer for exposed steel reinforcement, for use with Fosroc concrete repair mortars. Unit Size: 800ml can

An anti-corrosion primer for exposed steel reinforcement, for use with Fosroc concrete repair mortars. Unit Size: 1.9ltr and 800ml cans

Fosroc Nitoprime 25 is an epoxy primer which actively prevents corrosion and is tolerant to application over manually prepared surfaces.

Unit Size: pack

A high strength epoxy mortar, based on a high qaulity solvent-free epoxy resin system. The special silica aggregates provide high strength and excellent abrasion resistance. Unit Size: 16kg

A resin jointing and repair compound, based on a polyester resin system, for general purpose use. Unit Size: 2.7kg can only

A resin jointing and repair compound, based on a polyester resin system, for general purpose use. Unit Size: 14kg

Fosroc Nitomortar HB high build epoxy mortar is based on a high performance solvent-free epoxy resin system. The special lightweight filler is specifically designed to give excellent 'hanging' properties for vertical and overhead work. Unit Size: 9.3kg pack

A thixotropic system which can be injected into open ended cracks. Depth and quantity of resin need to be controlled and minimum crack width is 2mm. Unit Size: pack

A two part filled epoxy used to seal over the cracks in structural materials such as concrete. Unit Size: 5.5ltr

A low viscosity system suitable for surface cracks down to 0.2mm and internal cracks to 0.1mm. Self contained pack containing cartridges, nipples, hoses and air release pins. Unit Size: pack

Fosroc Nitokit Accessory pack contains an injection gun, plastic bucket, goggles and 5.5L nitokit surface sealant. Unit Size: pack

A thixotropic epoxy resin injection grout developed for the injection of cracks 0-.5 to 9mm wide in concrete and masonry, and has been specially formulated to minimise the drainage of resin from cracks which are incompletely sealed. Unit Size: 1 ltr pack

A low viscosity system for the injection of cracks between 0.3mm and 9mm wide in concrete and masonry, where both sides of the crack can be sealed to prevent resin drainage. Unit Size: 3 ltr pack (2 x 1.5ltr units each consisting of base & hardener)

A high build epoxy coating, non-toxic for application to damp surfaces. Unit Size: 2.5kg packs

A high build epoxy coating, non-toxic for application to damp surfaces. Unit Size: 2.5kg packs

A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures. Unit Size: 18.2kg bag powder component, 5kg liquid polymer component Available in grey and white.

A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures. Unit Size: 18.2kg bag powder component, 5kg liquid polymer component Available in grey and white.