Fosroc Concrete Repair

A thixotropic epoxy resin injection grout developed for the injection of cracks 0-.5 to 9mm wide in concrete and masonry, and has been specially formulated to minimise the drainage of resin from cracks which are incompletely sealed. Unit Size: 1 ltr pack

A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures. Unit Size: 18.2kg bag powder component, 5kg liquid polymer component Available in grey and white.

A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures. Unit Size: 18.2kg bag powder component, 5kg liquid polymer component Available in grey and white.

A resin jointing and repair compound, based on a polyester resin system, for general purpose use. Unit Size: 2.7kg can only

A specially developed solvent blend for use to clean resin commonly found in Fosroc solvent based products. Unit Size: 5L Drum

A high build epoxy coating, non-toxic for application to damp surfaces. Unit Size: 2.5kg packs

A high build epoxy coating, non-toxic for application to damp surfaces. Unit Size: 2.5kg packs

A 100% solids solvent-free epoxy resin containing pigments and fine filler. It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use. Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved. Unit Size: 4.5kg

An epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 and BS EN 1504-6 Anchoring of reinforcing steel bar. Conbextra EP10 is for grouting gap thicknesses from 0.25 to 10mm. Unit Size: 3ltr pack containing liquid and hardener, 2 x 1.5 ltr units

Fosroc P7 Primer can be used on porous surfaces with thioflex 600 pouring grade and gun grade sealants Unit Size: 5L Can

Fosroc P20 Primer is a single component, chemically active, high performance primer.

Unit Size: 5L can

Fosroc Conbextra EPR is a three-component system consisting of a base, hardener and filler, which are mixed and poured into the gap

Unit Size: 15L pack consisting of 3 parts.

A low viscosity system for the injection of cracks between 0.3mm and 9mm wide in concrete and masonry, where both sides of the crack can be sealed to prevent resin drainage. Unit Size: 3 ltr pack (2 x 1.5ltr units each consisting of base & hardener)

An epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 and BS EN 1504-6 Anchoring of reinforcing steel bar. Conbextra EPR is for grouting gap thicknesses from 10 to 120mm. Unit Size: 15 ltr packs, containing base, hardener and filler

Fosroc Nitokit Accessory pack contains an injection gun, plastic bucket, goggles and 5.5L nitokit surface sealant. Unit Size: pack

Fosroc Nitomortar HB high build epoxy mortar is based on a high performance solvent-free epoxy resin system. The special lightweight filler is specifically designed to give excellent 'hanging' properties for vertical and overhead work. Unit Size: 9.3kg pack

A two-component gun grade elastomeric sealant for limited movement joints. After mixing, the resultant compound will cure to provide an exceptionally robust seal, while retaining a degree of flexibility. Nitoseal PU800 can be used in joints between 5mm and 50mm wide. Unit Size: 2 x 2ltr

Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

A specially developed solvent blend for use to clean resin commonly found in Fosroc solvent based products. Unit Size: 25L Drum

Fosroc Nitoprime 25 is an epoxy primer which actively prevents corrosion and is tolerant to application over manually prepared surfaces.

Unit Size: pack

A thixotropic system which can be injected into open ended cracks. Depth and quantity of resin need to be controlled and minimum crack width is 2mm. Unit Size: pack

A low viscosity system suitable for surface cracks down to 0.2mm and internal cracks to 0.1mm. Self contained pack containing cartridges, nipples, hoses and air release pins. Unit Size: pack