Flooring

A polymer modified cementitious topping designed to eliminate surface irregularities and smooth internal and external concrete surfaces exposed to industrial traffic.

Unit Size: 25kg

High solids acrylic floor and wall sealer and curing compound.

Unit Size: 25 litre drum

A high efficiency, water based curing membrane for concrete. Unit Size: 200L Drum

It is a clean and fine dry aggregate sand fro brushing into joints of paving to help prevent movement whilst allowing drainage. Unit Size: Each

Sika Quartz Sand can be added to floor paint for indoor or outdoor use to increase slip resistance Unit Size: Bags

This concrete primer is a sytrene acrylate dispersion which can be diluted with water. Not containing amonia and offering good alkali resistance in both wet and dry environments. Unit Size: 5L drum

A pre-blended mix of Ardex A 35 cement and graded sand to produce ultra-rapid drying floor screeds for internal locations. Unit Size: 25kg

Designed as a light duty floor topping for upgrading and renovating new and existing internal floors

Unit Size: 25kg

A liquid curing aid formulated from inorganic silicates.

Unit Size: 200L Drum

A high efficiency, water based curing membrane for concrete. Unit Size: 20L Drum

Bagged Silver Sand Unit Size: 25kg

A one-part, pre-blended, coloured synthetic dry shake hardener for concrete comprising of cement, hard aggregates, compatible admixtures and pigment Unit Size: 25kg Bag

A cementitious product which consists of a blend of special cements and graded aggregates. Once mixed with water it provides a fast-setting mortar for a rapid installation. Unit Size: 25kg bag

Ardex A 35 produces ultra-rapid drying floor screed for internal locations. Unit Size: 25kg

DCP Cemflow Primer is a single component polymeric primer designed to promote the adhesion of cement based leveling compounds.

Unit Size: 5L

DCP Sethard S200 is a ready to use water based solution of sodium silicate that reacts with the free lime in concrete to provide a chemically hardened concrete surface

Unit Size: 200L Drum

A rapid drying, self-smoothing industrial screed and resin receiver suitable for industrial areas. Also known as an industrial self levelling compound. Unit Size: 25kg bag

Ardex A 38 produces ultra-rapid drying floor screed for internal and external locations. Unit Size: 25kg

Designed as a pump or hand applied levelling base screed for use under most finished floor coverings or resin base materials

Unit Size: 25kg

A clear, acrylic resin based, single pack solution designed to impregnate concrete surfaces combining the benefits of a curing aid, sealer, dust proofer and hardender.

Unit Size: 205 Litre Drum

A self-smoothing industry topping screed suitable for industrial areas. It can be left uncovered or be covered with epoxy resin or polyurethane covering. Unit Size: 25kg bag

Adotard MF Pro is a concrete surface retarder for mould face treatment. Unit Size: 25 litre

Ardex E 100 improves the compressive and tensile strengths, and elasticity and the bond strength of screeding and rendering mortars for use in internal and external locations. Unit Size: 5kg

Designed as an industrial grade floor topping for upgrading and renovating new and existing internal floors.

Unit Size: 25kg

Rapid drying, self-smoothing base and renovation screed suitable for residential and commercial areas. Unit Size: 25kg bags