Concrete Repair & Grout

A rapid setting cementitious waterstopping mortar which is easy to apply to horizontal, vertical or overhead surfaces at a wide range of thickness. Unit Size: 6kg

A rapid setting mortar which is easy to apply to horizontal, vertical or overhead surfaces at a wide range of thickness. Unit Size: 25kg

A two component cementitious slurry material comprising specially selected cementitious powders and liquid polymer additives. The mixed slurry is applied to properly prepared concrete, the specific Renderoc repair material is then compacted into the primer whilst this is still wet. Unit Size: 20kg Part A & 5 ltrs Part B

A two component cementitious slurry material compromising specially selected cementitious powders and liquid polymer additives. The mixed slurry is applied to properly prepared concrete, the specific Renderoc repair material is then compacted into the primer whilst this is still wet. Unit Size: 4kg Part A & 1 ltr Part B, or 20kg Part A & 5 ltrs Part B

A high strength, polymer modified, cementitious repair material which has been specifically engineered for vertical or horizontal use. It can be applied up to 10mm thickness in vertical locations and up to 100mm thickness in horizontal locations in a single application. Unit Size: 25kg

A high performance, multi-purpose cementitious protective coating, fairing and levelling mortar for applications from feather edge to 5mm, conforming to the requirements of BS EN 1504-3 Class R4. Unit Size: 20kg powder & 5 ltr liquid

Deep Fill Floor Leveller

Instarmac Ultratile ProLevel One is a single part, high strength, rapid drying and curing cementitious smoothing and levelling compound.

Unit Size: 20kg

A one-part, early ultra high strength grout with special shrinkage compensating components, which give a non-shrink grout in both the plastic and harden states. Unit Size: 25kg

A high-yield, non-shrink cementitious grout offering excellent flow, penetration and levelling. Its efficient formulation provides reliable performance while reducing material requirements, handling, storage and transport.

.

A cementitious epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. Unit Size: 20kg (A=1.14kg, B=2.86kg, C=16kg)

A one part, high flow, rapid strength cementitious grout. Unit Size: 25kg bag

A surface applied mixed corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete. Unit Size: 25ltr

A 1-part, cementitious, polymer modified coating material used as bonding primer and reinforcement corrosion protection. It contains recycled waste materials which leads to a reduced carbon footprint compared to an equivalent performing mortar. Unit Size: 25kg

A one component cement based polymer modified general purpose repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN 1504-3. Unit Size: 25kg bag

A 1-part, cementitious polymer modified, low shrinkage surfacing/ finishing mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations. Unit Size: 25kg

A 1-part, cementitious, fibre reinforced, low shrinkage repair mortar. It contains recycled waste materials and can reduce the carbon footprint application activity calculations. Unit Size: 25kg bag

A 1-component, fibre reinforced, low shrinkage repair mortar meeting the requirement of class-R4 of EN 1504-3. Unit Size: 25kg

A cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Unit Size: 25kg bag

A one component cement based polymer modified high build repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN1504-3. Unit Size: 25kg bag

A one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3. Unit Size: 25kg bag

A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete. Unit Sizes: 25 ltr

A high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete. Unit Sizes: 205ltr

A one part flowable shrinkage compensated general purpose cementitious grout. Meets the requirements of EN 1504-6: Anchoring of reinforcing bars. Unit Size: 25kg bag

A 1-part, cementitious, fast hardening free flowing grout which is shrinkage compensated and achieves high early and final strengths. Unit Size: 25kg bag