Fosroc Nitoseal PU800 is a two-component gun grade elastomeric sealant for limited movement joints. After mixing, the resultant compound will cure to provide an exceptionally robust seal, while retaining a degree of flexibility. Nitoseal PU800 can be used in joints between 5mm and 50mm wide.
Fosroc Patchroc 250 is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent repair mortar.
Fosroc Patchroc GP is a fast setting emergency patching mortar for concrete pavements and floors conforming to the requirements of BS EN 1504-3 Class R4. It is designed for horizontal use, and may be applied up to a maximum thickness of 100mm.
Fosroc Paveroc is high performance reinstatement mortar for concrete pavements and floors conforming to the requirements of BS EN 1504-3 Class R4. It is designed for horizontal use and may be applied up to a maximum thickness of 100mm.
Fosroc Renderoc DS is a polymer modified, fibre reinforced, low rebound, dry spray repair mortar conforming to the requirements of BS EN 1504-3 Class R4.
Renderoc DS is supplied as a ready to use blend of dry powders which is formulated for application using the dry spray process.
Fosroc Renderoc FC is a cementitious, polymer modified fairing coat, designed for vertical and overhead use to infill honeycombing and voids up to 3mm deep in the surface of concrete which is not trafficked and is subsequently coated.
Fosroc Renderoc GP is a general purpose cementitious repair mortar which has been specifically engineered for vertical repair work.
It can be applied in sections up to 70mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork.
Fosroc Renderoc HB is a high performance lightweight concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R2.
Renderoc HB has been specifically engineered for vertical and overhead repair work.
It can be applied in sections up to 100mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork.
Fosroc Renderoc HB30 is a high performance fibre reinforced lightweight concrete reinstaement mortar conforming to the requirements of BS EN 1504-3 Class R3.
Renderoc HB30 has been specifically engineered for vertical and overhead repair work.
It can be applied in sections up to 85mm thickness in vertical locations and up to 75mm thickness in overhead locations in a single application and without the use of formwork.
Fosroc Renderoc HB45 is a high performance, hand/wet-spray applied, fibre reinforced high build, high strength, concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R4.
Renderoc HB45 has been specifically engineered for vertical and overhead repair work.
It can be applied in sections up to 80mm thickness in vertical locations and up to 70mm thickness in overhead locations in a single application without formwork.
Fosroc Renderoc HBS is a high strength, high build concrete repair mortar which has been specifically engineered for vertical and overhead repair work.
It can be applied in sections up to 40mm thickness in vertical locations and up to 30mm thickness in overhead locations in a single application without the use of formwork.
Fosroc Renderoc LA60 is a high performance free flowing low alkali micro concrete conforming to the requirements of Highways England Specfication for Highways Works and EN1504-3 Structural and Non-structural concrete Class R4.
Renderoc LA60 can typically be applied in thicknesses between 25 and 300mm whilst minimising risk of thermal cracking.
Fosroc Renderoc Patch is a fast setting cementitious repair mortar designed for general concrete repairs, in particular for the precast industry.
Renderoc Pacth is designed for arris repairs and reprofiling and can be applied overhead from featheredge to 20mm maximum and vertically from featheredge up to 30mm maximum without slump deformation.
Fosroc Renderoc Plug 1 is a rapid setting cementitious waterstopping mortar which is easy to apply to horizontal, vertical or overhead surfaces at a wide range of thickness.
Fosroc Renderoc Primer is a two component cementitious slurry material comprising specially selected cementitious powders and liquid polymer additives.
The mixed slurry is applied to properly prepared concrete, the specific Renderoc repair material is then compacted into the primer whilst this is still wet.
Fosroc Renderoc Primer is a two component cementitious slurry material compromising specially selected cementitious powders and liquid polymer additives.
The mixed slurry is applied to properly prepared concrete, the specific Renderoc repair material is then compacted into the primer whilst this is still wet.
Unit Size: 4kg Part A & 1 ltr Part B, or 20kg Part A & 5 ltrs Part B