Concrete Repair & Grout

An epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 and BS EN 1504-6 Anchoring of reinforcing steel bar. Conbextra EP10 is for grouting gap thicknesses from 0.25 to 10mm. Unit Size: 3ltr pack containing liquid and hardener, 2 x 1.5 ltr units

High Strength Concrete 40N is a strong and hard-wearing general purpose concrete, manufactured from cement and specially selected and graded sand.

Unit Size: 20kg

Rapid Set Flowable Grout

Instarmac Ultrascape Flowpoint is a rapid set grout with high fluid consistency for early traficking that conforms to the strict demands of BS 7533.

Unit Size: 25kg paper bag

A Portland cement based product giving high strength, good flow and non-shrink properties. Placed grout gives structural support and good vibration resistance. Unit Size: 25kg

Heydi Powder is a plugging compound which rapidly hardens when exposed to water. Unit Size: 15kg

Webercem DS is a ready-to-use, polymer-modified, cement based structural concrete. Designed specially for dry process spray application giving high strength, low rebound and wastage. After testing this product meets the requirements for a class R4 repair Unit Size: 25kg

Ardex A 46 is a rapid repair, slump free mortar for external and internal repairs. The polymer modified mortar sets and hardens rapidly to give a repair of high performance, strength and hardness with a smooth paintable finish.

Unit Size: 11kg

An epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 and BS EN 1504-6 Anchoring of reinforcing steel bar. Conbextra EPR is for grouting gap thicknesses from 10 to 120mm. Unit Size: 15 ltr packs, containing base, hardener and filler

High Performance Bedding Mortar

Instarmac Ultracrete Envirobed CD534 is an environmentally friendly alternative to resin-based materials, specifically formulated for the bedding of all access covers.

Unit Size: 18kg paper bag and 2.5 ltr bottle

A premium grade, pre-mixed, one-part, cement based, non-shrink, fast-setting bedding mortar, suitable for the support of road ironwork and highway furniture. Unit Size: 25kg

Procem High Strength Cement is a high strength CEM I 52,5N Portland Cement.

Unit Size: 25kg

Heydi Powder is a plugging compound which rapidly hardens when exposed to water. Unit Size: 5kg

Webercem Grout Eco is a general purpose, non-shrink grout which comes premixed. Primarily designed as a pourable grout but can also be used at a plastic or dry pack consistency. Unit Size: 25kg bag

A fast setting resurfacing and levelling compound for use on concrete wearing surfaces exposed to normal foot and rubber wheeled traffic including driveways, walkways, and parking areas. Unit Size: 25kg

A high flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar. Conbextra HF is a free flowing grout for gap thicknesses up to 100mm. Unit Size: 25kg bag

UltraCrete Instant Road Repair® 10mm grade is designed for permanent repairs in type 3 and 4 roads.

Unit Size: 25kg foil bag and bucket

A pre-mixed, one-part, cementitious, non-shrink bedding and repair mortar , suitable for the support of road ironwork and highway furniture. Unit Size: 25kg bag

Reader Fast-Cem is a rapid setting 25N/mm² strength cement for when strength and set-time are a priority.

Unit Size: 20kg

Webercem Mortar is a pre-batched, single-component mortar which once mixed with water makes a low resisivity mortar, making it suitable for patch repairs on concrete structures where cathodic protection systems are to be used. Unit Size: 25kg bag

A solvent free polymer modified 2 component silicate resin system. The kit is easy to use and includes stitching pins, mixing/dosing bottles and protective gloves. Coverage: Each 600ml kit will repair approximately 4 linear meters.

A high-flow, non-shrink, aggregate filled cementitious grout, conforming to the requirements of BS EN 1504-3 Class R4. A free-flowing grout for gap thicknesses 75-500mm that ensures high early strength and long term durability. Unit Size: 25kg

A Portland cement based product giving high strength, good flow and non-shrink properties. Unit Size: 25kg

Reader GP Concrete is a general purpose 25N/mm strength concrete

Unit Size: 20kg

Webercem Spray RSF is a dry sprayed concrete which is able to achieve rapid early set. It come ready make and contains inert limestone aggregates, dust suppressants and acclerators. This is designed to have reduced rebound and excellent sprayability. Unit Size: 25kg bag

A ready mixed solvent free primer for use on absorbent and non-absorbent backgrounds in internal and external locations. Unit Size: 2kg

A free flow or pumped non-shrink, cementitious grout for use underwater or in tidal zones where "wash out" would be a problem with conventional grouts. Unit Size: 25kg

A cement based, one-component, rapid setting, shrinkage compensated repair concrete. Unit Size: 25kg

Reader PostFast Plus is a fast setting blended coarse concrete

Unit Size: Each

Webercem HB40 is a single-component, polymer-modified, high-build cementitious mortar designed for structural concrete repairs. Just the addition of clean water is required to produce a high strength mortar for soffit and vertical repairs. Unit Size: 20kg bags

A multi-purpose primer ideal for priming porous surfaces prior to the application of Ardex water-based levelling and smoothing compounds. Unit Size: 25kg

.

Webertec EP Bonding Aid is a high-build epoxy resin for priming epoxy repair mortars for bonding to concrete and masonary structures. Unit Size: 5.6kg box

A multi-purpose primer ideal for priming porous surfaces prior to the application of Ardex water-based levelling and smoothing compounds. Unit Size: 5kg

.

Fosroc Galvafroid zinc rich cold galvanising coating is formulated as an easily applied protection against corrosion on all ferrous metals. Galvafroid has a mid-grey matt finish. Unit Size: 1.9 ltr

Webertec EP Moratr is a three-component pack containing an epoxy resin, hardener and selected graded aggregate. These are mixed to produce a high-strength, impermeable and chemically-resistant mortar. Unit Size: 26kg box

A two component solvent free epoxy resin for use on concrete and cementitious surfaces that have damp surfaces (e.g. from water spillages or rain) prior to installing polyurethane screeds and self-smoothing epoxy floor coatings. Unit Size: 6kg

.

Fosroc Galvafroid zinc rich cold galvanising coating is formulated as an easily applied protection against corrosion on all ferrous metals. Galvafroid has a mid-grey matt finish. Unit Size: 400ml

Webertec EP Pourable Grout is a high-strength, chemically-resistant grout formulated from epoxy resin and graded aggregates producing materials with exceptional toughness. Each pack contains 3 componenents. Unit Size: 25kg box

Fosroc Galvafroid zinc rich cold galvanising coating is formulated as an easily applied protection against corrosion on all ferrous metals. Galvafroid has a mid-grey matt finish. Unit Size: 800ml

A 2-part, epoxy resin based, chemical resistant, protective coating. For use on many types of structures or elements for cementitious, metallic and epoxy resin binder substrates. Unit Size: 10kg (Part A 8.70 kg container, Part B 1.3 kg container)

A ready to use, non-shrink, cementitious grout, which has been formulated specifically for grouting of bridge bearings and parapet post baseplates. Conbextra BB can be used in section thicknesses of 10mm to 100mm. Unit Size: 25kg

A cement based, low alkali, one -component micro concrete which has non-shrink properties. It offers a flowable repair mortar suitable for pouring applications meeting the requirements of Class R4 of EN 15.4-3. Unit Size: 25kg bag

An ultra-high performance grout specifically designed for structural grouted connections for wind turbines foundations and oil and gas installations. Suitable for gap depths in the range of 10 to 150mm. Unit Size: 25kg

A one-component, cement-based powder mix which has special shrinkage compensating components. The mixed material produces a mortar, which can be rammed into gaps between concrete units to create a supporting fill without the use of shuttering Unit Size: 25kg

A single component cementitious high strength bedding mortar, used in the structural bedding in of precast modular concrete units. Unit Size: 25kg

An epoxy resin based mortar. It consists of a resin base, a hardener and a bag of specially graded fillers. The grading of the filling system enables application thicknesses of 20mm down to a featheredge. The mortar is suitable for placing using hand tools. Unit Size: 16.1kg (3 part product)

Fosroc Conbextra EPR is a three-component system consisting of a base, hardener and filler, which are mixed and poured into the gap

Unit Size: 15L pack consisting of 3 parts.