Concrete Repair & Grout

Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Fosroc Lokfix E55S is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Unit Size: 300ml

Applicator gun for Lokfix E75 Unit Size: Each

A two-component epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle. When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates. Unit Size: 385ml

A two component polyester anchoring grout supplied in pre-measured quantities. The material cures quickly to give consistent, high performance anchorages. It is a pourable grade, with a 25 minute gel time at 20°c for use in vertical down holes where the hole is 8 to 40mm greater in diameter than the bar. Unit Size: 2.5ltr

A modified acrylic emulsion which is specially designed for use as a bonding aid, curing agent and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external application. Unit Size: 5ltr

A 100% solids solvent-free epoxy resin containing pigments and fine filler. It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use. Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved. Unit Size: 4.5kg

A 100% solids solvent-free epoxy resin containing pigments and fine filler. It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use. Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved. Unit Size: 2.5kg

A modified acrylic emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. Unit Size: 5 ltr

A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures. Unit Size: 18.2kg bag powder component, 5kg liquid polymer component Available in grey and white.

A flexible two-component polymer cementitious coating, used for waterproofing water retaining structures and water excluding structures. Unit Size: 18.2kg bag powder component, 5kg liquid polymer component Available in grey and white.

A high build epoxy coating, non-toxic for application to damp surfaces. Unit Size: 2.5kg packs

A high build epoxy coating, non-toxic for application to damp surfaces. Unit Size: 2.5kg packs

A low viscosity system for the injection of cracks between 0.3mm and 9mm wide in concrete and masonry, where both sides of the crack can be sealed to prevent resin drainage. Unit Size: 3 ltr pack (2 x 1.5ltr units each consisting of base & hardener)

A thixotropic epoxy resin injection grout developed for the injection of cracks 0-.5 to 9mm wide in concrete and masonry, and has been specially formulated to minimise the drainage of resin from cracks which are incompletely sealed. Unit Size: 1 ltr pack

Fosroc Nitokit Accessory pack contains an injection gun, plastic bucket, goggles and 5.5L nitokit surface sealant. Unit Size: pack

A low viscosity system suitable for surface cracks down to 0.2mm and internal cracks to 0.1mm. Self contained pack containing cartridges, nipples, hoses and air release pins. Unit Size: pack

A two part filled epoxy used to seal over the cracks in structural materials such as concrete. Unit Size: 5.5ltr

A thixotropic system which can be injected into open ended cracks. Depth and quantity of resin need to be controlled and minimum crack width is 2mm. Unit Size: pack

Fosroc Nitomortar HB high build epoxy mortar is based on a high performance solvent-free epoxy resin system. The special lightweight filler is specifically designed to give excellent 'hanging' properties for vertical and overhead work. Unit Size: 9.3kg pack

A resin jointing and repair compound, based on a polyester resin system, for general purpose use. Unit Size: 14kg

A resin jointing and repair compound, based on a polyester resin system, for general purpose use. Unit Size: 2.7kg can only

A high strength epoxy mortar, based on a high qaulity solvent-free epoxy resin system. The special silica aggregates provide high strength and excellent abrasion resistance. Unit Size: 16kg

Fosroc Nitoprime 25 is an epoxy primer which actively prevents corrosion and is tolerant to application over manually prepared surfaces.

Unit Size: pack

An anti-corrosion primer for exposed steel reinforcement, for use with Fosroc concrete repair mortars. Unit Size: 1.9ltr and 800ml cans

An anti-corrosion primer for exposed steel reinforcement, for use with Fosroc concrete repair mortars. Unit Size: 800ml can

A two-component gun grade elastomeric sealant for limited movement joints. After mixing, the resultant compound will cure to provide an exceptionally robust seal, while retaining a degree of flexibility. Nitoseal PU800 can be used in joints between 5mm and 50mm wide. Unit Size: 2 x 2ltr

A high performance single component primer. Unit Size: 500ml

Fosroc P20 Primer is a single component, chemically active, high performance primer.

Unit Size: 5L can

Fosroc P7 Primer can be used on porous surfaces with thioflex 600 pouring grade and gun grade sealants Unit Size: 500ml Can

Fosroc P7 Primer can be used on porous surfaces with thioflex 600 pouring grade and gun grade sealants Unit Size: 5L Can

A two part high performance chemically active non-toxic liquid primer. Unit Size: 1ltr Can

Fosroc Patchroc 250 is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent repair mortar. Unit Size: 25kg bag

A fast setting emergency patching mortar for concrete pavements and floors conforming to the requirements of BS EN 1504-3 Class R4. It is designed for horizontal use, and may be applied up to a maximum thickness of 100mm. Unit Size: 25kg bag

Fosroc Paveroc is high performance reinstatement mortar for concrete pavements and floors conforming to the requirements of BS EN 1504-3 Class R4. It is designed for horizontal use and may be applied up to a maximum thickness of 100mm. Unit Size: 25kg bag

A polymer modified, fibre reinforced, low rebound, dry spray repair mortar conforming to the requirements of BS EN 1504-3 Class R4. Renderoc DS is supplied as a ready to use blend of dry powders which is formulated for application using the dry spray process. Unit Size: 25kg bag

A cementitious, polymer modified fairing coat, designed for vertical and overhead use to infill honeycombing and voids up to 3mm deep in the surface of concrete which is not trafficked and is subsequently coated. Unit Size: 25kg bag

A general purpose cementitious repair mortar which has been specifically engineered for vertical repair work. It can be applied in sections up to 70mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork. Unit Size: 25kg bag

A high performance lightweight concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R2. Renderoc HB has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 100mm thickness in vertical locations and up to 60mm thickness in overhead locations in a single application and without the use of formwork. Unit Size: 18kg bag

A high performance fibre reinforced lightweight concrete reinstaement mortar conforming to the requirements of BS EN 1504-3 Class R3. Renderoc HB30 has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 85mm thickness in vertical locations and up to 75mm thickness in overhead locations in a single application and without the use of formwork. Unit Size: 22kg bag

A high performance, hand/wet-spray applied, fibre reinforced high build, high strength, concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class R4. Renderoc HB45 has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 80mm thickness in vertical locations and up to 70mm thickness in overhead locations in a single application without formwork. Unit Size: 25kg bag

A high strength, high build concrete repair mortar which has been specifically engineered for vertical and overhead repair work. It can be applied in sections up to 40mm thickness in vertical locations and up to 30mm thickness in overhead locations in a single application without the use of formwork. Unit Size: 25kg

A high performance free flowing low alkali micro concrete conforming to the requirements of BS EN 1504-3 Class R4. Renderoc LA is designed for large volume repairs typically in excess of 25mm deep. Unit Size: 25kg

A high performance, free flowing low alkali micro concrete conforming to the requirements of BS EN 1504-3 Class R4. Renderoc LA55 is designed for large volume repairs typically in excess of 25mm deep. Unit Size: 25kg bags

A high performance free flowing low alkali micro concrete conforming to the requirements of Highways England Specfication for Highways Works and EN1504-3 Structural and Non-structural concrete Class R4. Renderoc LA60 can typically be applied in thicknesses between 25 and 300mm whilst minimising risk of thermal cracking. Unit Size: 25kg bag

A fast setting cementitious repair mortar designed for general concrete repairs, in particular for the precast industry. Renderoc Pacth is designed for arris repairs and reprofiling and can be applied overhead from featheredge to 20mm maximum and vertically from featheredge up to 30mm maximum without slump deformation. Unit Size: 25kg