Cetco Waterproofing

Cetco Coreflex XP is a 1.5mm nominal thermoplastic membrane reinforced with a 90 gram/sqm polyester reinforcing scrim integrally bonded to an XP Technology Core. Unit Size:1.7m x 12.9m rolls; 1.55m wide thermoplastic membrane with XP Technology Core offset by 150mm along the long roll edge.

.

Cetco Coreflash NR is a nominal 1.5mm thick non-reinforced solid white thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance. Coreflash NR is also resistant to most forms of fungus, algae and micro-biological attack. Unit Size: 1.55m x 12.9m rolls

Cetco Coreflash UV is a nominal 1.5mm thick reinforced thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance. Coreflash UV is also resistant to most forms of fungua, algae and microbiological attack. Unit Size: 1.55m x 12.9m rolls

Cetco Hydrofix 600 is a single part, rapid curing, modified polyurethane waterproofing membrane that can be applied directly to dry concrete surfaces. Unit Size: 15ltr drum

.

Cetco Aquadrain ICD 20mm is the highest drainage capacity membrane in the Aquadrain ICD range giving a void volume of 14 litres/m². Unit Size: 2.0m x 20m* *including flat overlapping edge (flange) without studs, working area ca. 40m²

Cetco Ultraseal XP is an active waterproofing membrane for exceptional performance in a wide-range of contaminated environments. Unit Size: 1.15m x 8.7m (10m²) roll

Cetco Cetbit 300 is a self-adhering waterproofing membrane consisting of 1.4mm of rubberised bitumen integrally bonded to a 0.1mm cross-laminated HDPE protective film. These two components combine to offer an extremely effective waterproofing barrier with a factory controlled thickness to ensure uniform application. Unit Size: Roll Width 1m, Roll Length 20m, Roll Area 20 sqm, Roll Weight 32kg

Cetco Volseal 250 is a highly elastic waterproof coating consisting of aggregates, cement-based binders and acrylic polymers. Unit Size: 25kg bag (Part A Powder) and 10kg Pails (Part B Liquid)

Cetco Aquadrain ICD 8mm is a medium capacity drainage membrane (4 litres/m²) for floors and walls both above and below ground level. Unit Size: 2.07m x 20m* *including flat overlapping edge (flange) without studs, working area ca. 40m²

Cetco Coredisc is a nominal 100mm (4") round x 1.5mm (60 mil) thcik non-reinforced thermoplastic disc. Coredisc is also resistant to most forms of fungus, algae and micro-biolocial attack. Unit Size: 100 Corediscs per box.

Cetco Swelltite is a highly effective waterproofing membrane consisting of a sodium bentonite compound integrally bonded to a geomembrane liner. Unit Size: 1.02m x 10m; 10.2 sqm per roll

Cetco Waterstop RX103 is a hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. Waterstop RX103 is produced in a rectangular shape measuring 15x10mm.

Cetco Volsheet DPC is a high performance polymeric Damp Proof Course (DPC). The product does not contain pitch or bitumen. Unit Size: 1000mm x 20m roll

Cetco Volseal 200 is a single component, surface applied material, which waterproofs and protects concrete in-depth. Unit Size: 25kg plastic tubs.

Cetco Seal XXP is trowel-grade mastic designed for a variety of surface preparation and detailing work with Ultraseal XP and other Cetco active waterproofing membranes. Unit Size: 15kg pail

Cetco Bentoseal is trowel-grade, sodium bentonite/butyl-rubber based mastic designed for a variety of surface preparation and waterproof detailing work with select Cetco waterproofing membranes. Unit Size: 15kg Pail

Cetco Maxbit SKW is a cold applied bitumen rubber compound designed for excellent adhesion of Swelltite membranes to structural substrates and as a damp-proof coating. Unit Size: 20kg pails