Search
Order hotline: 0844 800 2464
Email: sales@preconproducts.co.uk
- Categories
- Home Page
- My Account
- Concrete Accessories
- Ground & Slab Accessories
- Concrete Chemicals
- Formwork & Accessories
- Reinforcement
- Concrete Repair & Grout
- Waterproofing
- Gas Protection
- Safety & Protection Products
- Flooring
- Ground Stabilisation
- Tools and Fixings
- Brickwork
- Expansion
- Sealing and Bonding
- News & Resources
Adomast
Adomast Manufacturing are UK Formwork & Construction Chemical Specialists. Adomast manufacture a wide range of specialist products designed to meet even the most complex challenges including: Mould Release Agents & Formwork Treatments, Admixtures, Concrete Curing Agents, Waterproofing, Cleaning Products, Construction Repair Mortars and Resin Repair & Adhesives. |  |
PRECON ADOSTRIKE RELEASE OIL 205LTR
High Oil Content Solvent Based Mould Oil Unit Size: 205ltr
Stock Status: Out of stock
£360.72 excl tax
ADOWASH CLEANING SOLVENT 5LTR
Adowash is a solvent based cleaner developed for the cleaning of sprayers and other equipment which has been used with film forming resins or oil based mould release agents. Unit Size: 5ltr
Stock Status: 5 in stock
£25.36 excl tax
ADOTUF DUST PROOFER 20LTR
Adotuf is a liquid silicate solution which when applied to cement bound floors case hardens the surface, rendering it dust proof even when subjected to wire brushing. Unit Size: 20ltr
Stock Status: 15 in stock
£30.89 excl tax
ADOTUF 24 20LTR
Adotuf 24 is a concrete surface hardener and dustproofer. Unit Size: 20ltr
Stock Status: Out of stock
£33.33 excl tax
ADOTUF 24 205LTR
Adotuf 24 is a concrete surface hardener and dustproofer. Unit Size: 205ltr
Stock Status: Out of stock
£297.56 excl tax
ADOSTRIP MOULD OIL 1000L IBC
Adostrip Mould Oil is a formwork and mould release agent designed for general site use to achieve easy concrete release. Unit Size: 1000 ltr
Stock Status: Out of stock
£1,817.90 excl tax
ADOMAST STYROKLENS 5 LITRE TUB
A specially formulated solvent developed to safely dissolve away and emulsify unwanted polystyrene box outs, void formers and inserts. Unit Size: 5ltr
Stock Status: 16 in stock
£24.73 excl tax
ADOMAST SAFETARDR GEL
Safetard Gel has been developed to retard or slow the set of the surface cement content within the fresh concrete that comes into contact with it. It is suited to the production of exposed aggregate finished or "keyed" surfaces for construction joints.
Unit Size: 25ltr
Unit Size: 25ltr
Stock Status: 89 in stock
£45.66 excl tax
ADOMAST SAFETARD SPRAY 205 LTR
Adomast Safetard Liquid is a Brown Coloured Water Based Surface Retarder for Application to Concrete Top Face Unit Size: 205ltr
Stock Status: 4 in stock
£260.00 excl tax
ADOMAST SAFETARD SPRAY
Adomast Safetard Liquid is a brown coloured water based surface retarder for application to Concrete Top Face Unit Size: 20ltr
Stock Status: 49 in stock
£31.42 excl tax
ADOMAST SAFELEASE 205LTR
Safelease is an environmentally friendly and highly effective mould release agent for general site use. It is low odour, low VOC and non-staining, designed with minimum blowhole formation and providing a sharp, uniform and non-stained concrete surface. Unit Size: 205 ltr
Stock Status: 1 in stock
£226.73 excl tax
ADOMAST SAFELEASE
Safelease is an environmentally friendly and highly effective mould release agent for general site use. It is low odour, low VOC and non-staining, designed with minimum blowhole formation and providing a sharp, uniform and non-stained concrete surface. Unit Size: 20 ltr
Stock Status: 28 in stock
£28.53 excl tax
ADOMAST SAFECURE SEALER 205
A blend of high performance polyurethane and acrylic polymers, when applied to a freshly laid concrete surface they will dry to a clear film for curing, sealing and dustproofing concrete. Unit Size: 205 ltr
Stock Status: Out of stock
£537.18 excl tax
ADOMAST SAFECURE SEALER
A blend of high performance polyurethane and acrylic polymers, when applied to a freshly laid concrete surface they will dry to a clear film for curing, sealing and dustproofing concrete. Unit Size: 20 ltr
Stock Status: 6 in stock
£83.18 excl tax
ADOMAST SAFECLEAN 5 LITRE TUB (Concrete Remover for Plant and Tools)
Adosafe Clean has been developed to replace traditional highly corrosive, strong mineral acids to facilitate the safe and non-hazardous cleaning and removal of dry, hardened concrete, efflorescence and tar deposits from most surfaces without damaging or corroding the surface. Unit Size: 5ltr
Stock Status: Out of stock
£37.02 excl tax
ADOMAST NATUROL CR2 (25 LITRE)
Naturol CR2 is a readily biodegradable chemical release agent specially formulated to give easy release from precast moulds or formwork and provides a high quality surface finish to concrete. Unit Size: 25 ltr
Stock Status: 111 in stock
£99.03 excl tax
ADOMAST NATUROL CR2 (205 LT DRUM)
Naturol CR2 is a readily biodegradable chemical release agent specially formulated to give easy release from precast moulds or formwork and provides a high quality surface finish to concrete. Unit Size: 205 ltr
Stock Status: Out of stock
£770.05 excl tax
ADOMAST FORMWAX 25 LITRE PACK
Adowax is a ready to use, brushable wax, Protective Coating & Mould Release Agent Unit Size: 20kg
Stock Status: 18 in stock
£70.00 excl tax
ADOMAST EXTRACON DS
Extracon DS is a chemical release agent designed for general site and precast use, suitable for indoor and outdoor use. Unit Size: 25ltr
Stock Status: 2 in stock
£58.80 excl tax
ADOMAST CRACK REPAIR SFR 300ml
Adobond SFR is a high-strength, chemical resistant, fast curing anchoring system for bonding either masonry to masonry or for bonding other construction components, such as metal pipework to masonry, brick or pipework etc. Unit Size: 300ml
Stock Status: 17 in stock
£9.45 excl tax
ADOMAST ADOTARD MF PRO 25 LITRE
Adotard MF Pro is a concrete surface retarder for mould face treatment. Unit Size: 25 litre
Stock Status: Out of stock
£87.05 excl tax
ADOMAST ADOSTRIP MOULD OIL 5 Ltr
Adostrip Mould Oil is a formwork and mould release agent designed for general site use to achieve easy concrete release. Unit Size: 5 ltr
Stock Status: 6 in stock
£16.10 excl tax
ADOMAST ADOSTRIP MOULD OIL 205LTR
Adostrip Mould Oil is a formwork and mould release agent designed for general site use to achieve easy concrete release. Unit Size: 205 ltr
Stock Status: 6 in stock
£341.25 excl tax
ADOMAST ADOSTRIP MOULD OIL
Adostrip Mould Oil is a formwork and mould release agent designed for general site use to achieve easy concrete release. Unit Size: 20 ltr
Stock Status: 84 in stock
£36.67 excl tax
ADOMAST ADOPLUG 8 KILO
Adoplug is a cementitious repair, sealing and wall tie filling mortar. Unit Size: 8kg
Stock Status: 135 in stock
£20.18 excl tax
- 1
- 2
Min Max
£9.00 £1,818.00
.png)
Payment options
