Adomast Manufacturing are UK Formwork & Construction Chemical Specialists.
Adomast manufacture a wide range of specialist products designed to meet even the most complex challenges including: Mould Release Agents & Formwork Treatments, Admixtures, Concrete Curing Agents, Waterproofing, Cleaning Products, Construction Repair Mortars and Resin Repair & Adhesives.
Adocoat is an alkali resistant cold applied rubberised bitumen emulsion which imparts excellent adhesion to sound building materials, including asphalt.
Unit Size: 205ltr
Bitument Rubber Latex Waterproof Coating
Adocoat is an alkali resistant cold applied rubberised bitumen emulsion which imparts excellent adhesion to sound building materials, including asphalt.
Unit Size: 25ltr
Adocoat LAC is a bitumen based compound for application as a damp proof membrane in solid floor construction, sandwiching damp proof membranes under concrete and roof screeds, external waterproofing to buried concrete or as a tanking membrane.
Unit Size: 25ltr
Adopatch is a cementitious powder compound with the inclusion of a polymer to promote adhesion and resistance to the passage of water and a water reducing agent to facilitate a low water: cement ratio.
Unit Size: 8kg
Adopatch Kerb Repair is a pre-packed, single component, shrinkage compensated, cementitious kerb mortar suitable for rapid repair.
It is manufactured with the inclusion of a polymer to promote adhesion and water resistance, and a water reducing agent to facilitate a low water cement ratio.
Unit Size: 8kg
Adopatch is a cementitious powder compound with the inclusion of a polymer to promote adhesion and resistance to the passage of water and a water reducing agent to facilitate a low water: cement ratio.
Unit Size: 8kg
Adobond SFR is a high-strength, chemical resistant, fast curing anchoring system for bonding either masonry to masonry or for bonding other construction components, such as metal pipework to masonry, brick or pipework etc.
Unit Size: 300ml
Adosafe Clean has been developed to replace traditional highly corrosive, strong mineral acids to facilitate the safe and non-hazardous cleaning and removal of dry, hardened concrete, efflorescence and tar deposits from most surfaces without damaging or corroding the surface.
Unit Size: 5ltr
A blend of high performance polyurethane and acrylic polymers, when applied to a freshly laid concrete surface they will dry to a clear film for curing, sealing and dustproofing concrete.
Unit Size: 20 ltr
A blend of high performance polyurethane and acrylic polymers, when applied to a freshly laid concrete surface they will dry to a clear film for curing, sealing and dustproofing concrete.
Unit Size: 205 ltr
Adotuf is a liquid silicate solution which when applied to cement bound floors case hardens the surface, rendering it dust proof even when subjected to wire brushing.
Unit Size: 20ltr
Naturol CR2 is a readily biodegradable chemical release agent specially formulated to give easy release from precast moulds or formwork and provides a high quality surface finish to concrete.
Unit Size: 205 ltr
Naturol CR2 is a readily biodegradable chemical release agent specially formulated to give easy release from precast moulds or formwork and provides a high quality surface finish to concrete.
Unit Size: 25 ltr
Adolease is a low viscosity, readily applied mineral oil based mould release agent. It is designed to give reliable, high performance with all types of formwork.
Unit Size: 20ltr
Safetard Gel has been developed to retard or slow the set of the surface cement content within the fresh concrete that comes into contact with it. It is suited to the production of exposed aggregate finished or "keyed" surfaces for construction joints.
Unit Size: 25ltr
Adowash is a solvent based cleaner developed for the cleaning of sprayers and other equipment which has been used with film forming resins or oil based mould release agents.
Unit Size: 5ltr